Table of Contents
Advertisement
Screw (quantity)
SCRW M3X4MM*D6 FLH NYLOK(2)
Memory module
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
Ensure that you follow the installation order for memory modules shown in the following illustration.
For access, remove the following parts in order, if any:
• "Computer stand" on page 51.
• "Rear I/O cover" on page 54.
• "System board shield" on page 55.
• "VESA mount bracket" on page 57.
Removal procedure
Torque
3 ± 0.5 lb/in
.
Chapter 6
Hardware removal and installation
63
Advertisement
Table of Contents
