Setting The Clock; Automatic Cooking - Hotpoint HDM67V9HCB Manual

ELECTRONIC TIMER (PROGRAMMER) ELECTRONIC TIMER (PROGRAMMER)
Upper cavity button
Duration icon (Upper cavity)
Delay icon (Upper cavity)
Not active in this model Not active in this model Not active in this model Not active in this model Not active in this model

SETTING THE CLOCK

After connecting to the power supply or after
a power cut, the display will flash 12:00 and will
start to count up.
1. Use the and
If you press and hold any of the buttons the
numbers will scroll quicker making it easier
to set the required time.
2. After 3 seconds the numbers will stop
flashing and the time is set.
NOTE: The clock can be set with the oven on or
off (assuming that a programmed cooking time
has not been set).
1. Press and hold the "Clock" button for 2
seconds until there is a beep, the "Clock" icon will
start flashing.
2. Use the and
If you press and hold any of the buttons the
numbers will scroll quicker making it easier to
set the required time.
3. After 3 seconds or by pressing the "Clock"
button, the numbers stop flashing, the time is
set and the ":" starts flashing to indicate the
clock is running.

AUTOMATIC COOKING

Both ovens can be set for automatic cooking
simultaneously.
NOTE: A cooking temperature and/or function
must be selected after programming has taken
place.
PROGRAMING THE COOKING DURATION
FOR THE UPPER/LOWER CAVITY
1. Press the Upper or Lower Oven Cavity button,
the "Cook Time" icon will start blinking and
Lower arrow
buttons to set the time.
buttons to set the time.
Clock icon
Clock button
Upper arrow
00:00 is displayed. NOTE: - If after 3 seconds
no other buttons are pressed, the display will
revert back to the time in the display.
2. Use the and
required cooking duration. If you press and hold
any of the buttons the numbers will scroll
quicker making it easier to set the required
time. After 3 seconds the 'Cook Time' icon
will stop flashing and the cook time is set.
3. The ':' will start flashing to indicate that
the countdown has started.
4. Set the required cooking temperature and/or
function required by turning the relevant
control knob(s)
5. When the cooking time expires 'End' is displayed,
the related cavity will switch off and a beep will sound.
6. Turn the temperature and/or function knob(s) to the
OFF position, press the Upper or Lower Oven Cavity
button whichever was in use, the display will show
the other cavity state or the clock and 'End'
disappears.
SETTING A DELAY OF THE COOKING -
Minimum 5 minutes in 5 minute intervals
THE DELAY OPTION IS AVAILABLE ONLY
FOR THE LOWER CAVITY BUTTON
Example: It is 12:00 noon and a cooking
duration of 1 hour is required with the food
to be ready for 17:00. Therefore in this case set
cooking duration first for 1 hour and then
a delay of 4 hours.
1. Set a cooking duration time as above
(steps 1 to 3) and then, within 3 seconds,
press the Lower Oven Cavity button, 00:00 is
displayed and the 'Delay' icon will start blinking.
NOTE: If after 3 seconds no other buttons are
pressed, the cooking duration will start to count down.
Lower cavity button
Delay icon (Lower cavity)
Duration icon
(Lower cavity)
buttons to set the
EN
11