Replacing The System Outer Foil And The Inner Blades - Panasonic ES CT20 Operating Instructions Manual

4
Dry the outer foil section, the
shaver, and the trimmer
completely�
• Allow the shaver to dry in the
shade, avoid direct sunlight.
5
Lubricate the shaver�
It will keep the movement of the blade
smooth and maintain a comfort shave.
1. Apply one drop of oil to each of the
system outer foils.
2. Raise the trimmer and apply a drop of oil.
3. Switch the shaver on, and run it for approximately five seconds.
4. Switch off the shaver, and wipe off any excess oil from the
system outer foil with a soft cloth.
The mark on the left means suitable for cleaning
under an open water tap�
Warning
Disconnect the cord from the shaver before cleaning it in
water to prevent electric shock.
Notes
• Be careful not to hit the main body on the sink or any other object
while draining the water. Failure to do so may cause malfunction.
• Do not wipe with thinners, benzine, alcohol etc.
Doing so may cause malfunction, or cracking or discoloration of
the parts.
Wipe with diluted soapy water.
• Do not use any kitchen or bathroom detergents other than hand
soap.
Doing so may cause malfunction.
Cleaning with the brush
Remove the outer foil section and the inner blades.
(See this page.)
► Cleaning with the long brush
Clean the outer foil section, system
outer foil, the shaver body and the
trimmer using the long brush.
► Cleaning with the short brush
• Clean the inner blades using the short
brush by moving it in direction as illustrated.
• Do not move the short brush
perpendicularly against the blades as it
will damage the inner blades and affect
their sharpness.
Replacing the system outer foil and
the inner blades
system outer foil once every year
inner blades once every two years
►Removing the outer foil section
Press the foil frame release buttons and lift the
outer foil section upwards.
13