Cleaning The Shaver - Panasonic ES CT20 Operating Instructions Manual

►Using the trimmer
1. Slide the trimmer handle up.
2. Press and use.
Press and hold the top knob (a) and
slide the trimmer handle down to lower
the trimmer.
Tips for better usage
Apply the trimmer edge perpendicular to skin gently and move
downward slowly.
Trimming sideburns
12

Pre‑shave of long beards

Cleaning the shaver

We recommend cleaning the shaver after each use.
Cleaning with water
• Turn the shaver off and disconnect the AC adaptor.
1
Apply some hand soap and some
water to the system outer foil�
2
Press for more than
2 seconds to activate the sonic
vibration cleaning mode�
• Splashing of foam is suppressed.
• The battery capacity lamps blink in order.
• After about 20 seconds, it will be
automatically turned off, or you can turn
it off by pressing the power switch.
3
Remove the outer foil section
and clean with running water�
• See page 13 for attaching and
removing the outer foil section.
• Splashing is reduced by rinsing the
shaver in sonic vibration cleaning mode.
• After rinsing with water, shake the shaver up and down for a
few times to remove excess moisture and then wipe off any
drops of water with a dry cloth.