Table of Contents
Advertisement
A_
CONTROLS AND CONNECTION
FRONT PANEL
1.
INPUT: This jack allows for the connection of the guitar to the BBE 381 pre-amp.
2.
CH.
1
: This "GREEN" LED illuminates when the
Clean Channel
is selected.
CLEAN CHANNEL
3.
VOLUME: This knob controls the level of the
Clean Channel
volume. Use this
knob in conjunction with the
Distortion Channel's
volume knob to achieve the
desired balance.
4.
BASS: This control adjusts the amount of low frequency content, shelved at 80Hz,
within the channel. Turning the knob to its maximum position (fully clockwise) boosts
the low frequencies +10dBu. Turning the knob to the minimum position (fully
counter-clockwise) would be flat or no change.
5.
MID: This control adjusts the amount of mid range frequency content, peaked at
500Hz, within the channel. Turning the knob to its maximum position (fully clockwise)
boosts the mid range frequencies -t-8dBu. Turning the knob to its minimum position
(fully counter-clockwise) would be flat or no change.
6.
HIGH: This control adjusts the amount of high frequency content, shelved at 6kHz,
within the channel. Turning the knob to its maximum position (fully clockwise) boosts
the high frequencies -i-IOdBu. Turning the knob to its minimum position (fully
counter-clockwise) would be flat or no change.
Advertisement
Table of Contents
