Makita 9032 Instruction Manual
Filing sander
Hide thumbs
Also See for 9032:
- Instruction manual (41 pages) ,
- Technical information (8 pages) ,
- Parts breakdown (2 pages)
Related Manuals for Makita 9032
Summary of Contents for Makita 9032
- Page 1 Filing Sander MODEL 9032 001214 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
-
Page 2: Specifications
Responsible manufacturer: faces. Makita Corporation Anjo Aichi Japan Power supply The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on single-phase AC supply. -
Page 3: General Safety Rules
GENERAL SAFETY RULES GEA001-3 WARNING: Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool. - Page 4 19. Store idle power tools out of the reach of chil- Always use safety glasses or goggles. Ordinary dren and do not allow persons unfamiliar with eye or sun glasses are NOT safety glasses. the power tool or these instructions to operate Hold the tool firmly with both hands.
-
Page 5: Functional Description
FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Adjusting arm inclination The arm can be pivoted and fixed at any desired angle within the “A” range 001215 according to the operating position or the figure of the workpiece. - Page 6 Speed adjusting dial 001218 The belt speed can be infinitely adjusted between 5 m and 28 m per second by turning the speed adjusting dial to a given number setting from 1 to 6. Higher speed is obtained when the dial is turned in the direction of number 6; lower speed is obtained when it is turned in the direction of number 1.
-
Page 7: Operation
1. Dust nozzle 2. Hose 28 3. Hose of vacuum cleaner 4. Vacuum cleaner When connecting to Makita vacuum cleaner, an optional hose 28 mm in inner 001222 diameter is necessary. 1. Dust nozzle 2. Hose 28 3. -
Page 8: Maintenance
1. Brush holder cap 2. Screwdriver To maintain product SAFETY and RELIABILITY, repairs, any other mainte- nance or adjustment should be performed by Makita Authorized Service Cent- ers, always using Makita replacement parts. - Page 9 CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
- Page 10 Memo...
- Page 11 Memo...
- Page 12 Makita Corporation Anjo, Aichi, Japan 884410D223...