Pro Settings - Sony FW-85EZ20L Reference Manual

Pro settings

In [Pro settings], you can use various
convenient functions for professional use.
How to use Pro settings
1
Press the HOME/MENU button on the
remote control.
2
Go to [Settings] t [Pro settings], then
select the desired settings.
For each setting, refer to the following.
Initialize Pro settings
All changes will be discarded, and default
settings will be restored.
Install APK
Install the APK file for the Android TV app to
the LCD Display using a USB storage media.
1
Select [Pro settings] t [Install APK].
2
Select an APK.
Note
• This menu is displayed only when the .apk file
exists in the USB storage media.
PC input optimization
Show the typical PC format in full screen by
keeping the aspect ratio.
1
Select [Pro settings] t [PC input
optimization].
2
Change the settings.
The default setting is Off.
Wake-up on signal
a) Automatically turn on the LCD Display
and switch input when an HDMI input is
connected.
b) Automatically turn off the LCD Display
when the HDMI input is disconnected.
1
Select [Pro settings] t [Wake-up on
signal].
2
Select the option.
[Disable] (Default): The function is
disabled.
[Always enabled]: Both function a) and b)
are enabled.
[Input change only]: Only function a) is
enabled.
[Specified hours]: You can specify the
start/end time during which the function
is enabled.
Lock settings
You can protect the settings of [Pro
settings] by using a PIN.
1
Select [Pro settings] t [Lock settings].
2
Set the PIN by following the instruction
on the screen.
Initial input source
Set the input that is displayed when the
LCD Display is turned on.
1
Select [Pro settings] t [Initial input
source].
2
Select a primary input source.
Power Scheduling
Set the times for the LCD Display to turn on
and off automatically, including a schedule
to run periodically (daily or weekly).
1
Select [Pro settings] t [Power
Scheduling].
2
Select the time / the day of week to turn
on and off.
Periodic restart
Restart the LCD Display at a set time. This
can schedule periodic restarts (daily or
weekly). You can select whether a restart
should be executed or not while the LCD
Display is on. It is recommended to
schedule a periodic restart of the LCD
Display to maintain system stability.
1
Select [Pro settings] t [Periodic restart].
2
Turn on [Periodic restart] function.
3
Set the time, the day of week to restart
the LCD Display.
4
Select whether a restart should be
executed or not while the LCD Display is
on.
Display/Remote controls
Enable or disable the buttons on the LCD
Display or the remote control.
1
Select [Pro settings] t [Display/Remote
controls].
2
Select an option.
[Display control]: Enable or disable the
buttons on the LCD Display.
[IR remote control]: Enable or disable the
buttons on the IR remote control.
EN GB
9
EN