Roland alpha JUNO-2 Owner's Manual page 20

20
Oo DCO Aftertouch Sensitivity
Example V
1 DCO Bender Range
Example V
oO DCO Pulse Waveform
Example V
Pulse wave is selected.
This parameter determines the depth of the vibrato
effect when it is controlled by aftertouch. 0 to 15
are valid for this parameter.
This sets the maximum effect of the Pitch Bender
caused by moving the Pitch Bender/Modulaion
lever. 0 to 12 are valid for this parameter, and 1 is
semi-tone, therefore, 12 is an octave.
Display
Waveform Spectrum
See page 21
"DCO PW/PWM
Depth"
* The pulse width of 03 can be set at DCO PW/PWM
Depth.
© DCO Sawtooth Waveform
Example V
Sawtooth waveform is selected.
See page 21 "DCO
PW/PWM Depth"
* The pulse width of 03 can be set at DCO PW/PWM
Depth.