Grundig 32 GHW 5740 User Instructions page 76

GLOSSARY
Depending on the television model.
ARC
The ARC (Audio Return Channel) can be used
to play back the audio signal from the television
channel using an HDMI cable or an optical
cable with a multi-channel amplifier.
Backlight
Manual setting for back lighting (only active if
dynamic back lighting is switched to "OFF").
This setting also directly impacts power con-
sumption.
Block­Noise­Reduction
This function can only be selected with digital
reception sources and AV presets. It reduces any
interference from artefacts (pixel blocks) from
digital programmes due to MPEG compression
(such as from DVB-T receivers and lower trans-
mission rates or DVD players).
Boot­loader­version
Boot loader is a software application that is
loaded by the device firmware from a bootca-
pable medium and then executed. The boot
loader then loads further parts of the operating
system.
Common­Interface
Interface for a DVB receiver. Encrypted chan-
nels can only be viewed with a CA module
suitable for the encryption system and in con-
junction with the corresponding smart card.
Digilink
This function uses the CEC (Consumer Electron-
ics Control) protocol.
CEC allows external devices connected to the
HDMI sockets with an HDMI cable (e.g. DVD
player) to be operated with a remote control.
DiSEqC
DiSEqC (Digital Satellite Equipment Control) is
a digital system for controlling complex satellite
systems with a motor or several LNBs.
DiSEqC is necessary if two or more satellite posi-
tions need to be controlled.
76­
ENGLISH
­ - -------------------------------------------------------------------------------------------------------------
DVB-C
DVB-C (Digital Video Broadcasting – Cable)
and the successor DVB-C2 standard are varia-
tions of DVB which is used for transmitting digital
radio and television signals via a cable connec-
tion.
DVB-S
DVB-S (Digital Video Broadcasting – Satellite)
is the name given to broadcasting DVB signals
via satellite.
DVB-T
DVB-T (Digital Video Broadcasting – Terrestrial)
is a variation of DVB which is used for transmit-
ting digital radio and television signals via a
cable connection.
Dynamic­Contrast
The function dynamically and optimally adjusts
the contrast for the respective picture content by
analysing images and then altering this depend-
ing in a change in contrast. This increase the
contract, however may also reduce the visible
brightness levels in the picture.
Film­mode
Detects and processes feature films automati-
cally for all channel sources. This means you will
always receive an optimal picture.
This functions in the modi 480i, 576i and 1080i
in TV playback and for other channel sources.
If the »Film mode« is switched on for pro-
grammes without a feature film signal, minor
problems such as picture freeze, defective sub-
titles or fine lines in the picture could occur.
Firmware­version
Firmware is the term used for software that is em-
bedded in a programmed chip (microcontroller).
It is mostly stored in a flash memory, an EPROM
or an EEPROM. The firmware contains functions
for controlling the device.