Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Grundig 32 GHB 5241
Summary of Contents for Grundig 32 GHB 5241
- Page 1 Television Brief Instruction 32 GHB 5241...
-
Page 2: Table Of Contents
CONTENTS --------------------------------------------------------------------------------------------------------------- 25 FUNCTIONINGOFTHETV-BASIC 4 SETUPANDSAFETY FUNCTIONS 7 GENERALINFORMATION Basic functions Special features of your television Changing the picture format Receiving digital channels 27 ELECTRONICTVGUIDE Important notes on environmental protection Electronic TV guide Notes on still pictures 28 TELETEXTMODE 9 PACKAGINGCONTENTS Text mode Standard accessories Additional functions 10 CONNECTION/ 29 USBMODE PREPARATION The file formats Setting up with stand Connecting external data media Preparing for mounting on the VESA... - Page 3 CONTENTS --------------------------------------------------------------------------------------------------------------- 38 USINGEXTERNALDEVICES HDMI CEC HDMI CEC connection functions of the television High definition – HD ready Connection options Connecting an external device Headphones Hi-fi system 41 OPERATIONWITHCOMMON INTERFACE What is Common Interface? Inserting the CA module Access control for CA module and smart cards 42 DETAILEDCHANNELSETTINGS Searching for all digital television channels from a satellite automatically Searching for digital television channels from a satellite manually 44 LNB Settings Motorized antenna setup (DiSEqC 1.2) Searching for digital television channels through cable automatically Searching for digital television channels through cable manually Searching for digital television channels through aerial automatically Manual searching for digital television channels with aerial connection Tuning analogue television channels Displaying signal information ...
-
Page 4: Setupandsafety
SETUPANDSAFETY - ------------------------------------------------------------------------------------ About your TV set Safety WARNING I n addition to DVB-S, DVB-T and DVB-C digital TV programmes, you can also watch analogue Risk of electrical accident TV broadcasts with your TV set. D o not dismantle the TV set. Safety risk may arise and also the guarantee of the product Intended use can be void if the television set is opened. T he TV set is designed for use in dry rooms. T he TV set can only be operated with the power cable or the AC/DC adapter supplied U se the TV set with the supplied stand or a with the product. suitable VESA bracket. D o not operate the TV set with a damaged T he TV set is primarily intended for the power cable/AC/DC adaptor (if supplied). playback of TV programmes, streaming content and music/video material from I f the plug on the TV set has an earthing external devices. Any other use is strictly contact, only insert the plug into a socket with... - Page 5 SETUPANDSAFETY - ------------------------------------------------------------------------------------ WARNING CAUTION Shortened service life due to high Injuries caused by falling TV set operating temperature Never place the TV set on an unstable surface. The TV set may fall, causing serious injury, D o not place the TV set next to heating units or in direct sunlight. possibly leading to death in isolated cases. Observe the following precautions especially to T o ensure adequate ventilation, maintain protect the children from such negative incidents: clearance of at least 10 cm around the TV set. Only use furniture that can safely support the Disposing the packaging TV set. T he packaging materials are dangerous for Make sure that the TV set does not protrude children. Keep the packaging materials out of beyond the dimensions of the furniture on the reach of children.
- Page 6 SETUPANDSAFETY - ------------------------------------------------------------------------------------ Environmental information Do not dispose of batteries in the household waste. Used batteries must be returned to retail stores or public collection points. You help protect the environment in this way. B e sure to dispose of packaging materials for your product separately according to the guidelines of local authorities so that they can be recycled in an environmentally safe manner. Do not dispose of the product along with normal household waste at the end of its service life. Take it to a recycling center for electrical and electronic equipment. Tips for power saving Switch the TV set to stand-by if you will not use it for a while. In standby mode, the TV set uses very little energy (≤ 0.5 W). I f you do not use the TV set for an extended period, turn it off with the power switch or unplug the power cord from the socket. If you turn off the device or disconnect it from the power supply, the switch-on timer and programmed recordings will not work. S elect a location so that no direct sunlight falls on the screen. Thus, you can select a lower backlight and provide power saving. 6...
-
Page 7: Generalinformation
GENERALINFORMATION - ------------------------------------------------------------------ Specialfeaturesofyour Receivingdigitalchannels television To receive digital satellite channels (DVB-S/ S2) you need a satellite antenna. With your TV set, you can receive and watch digital TV programmes including the High T o receive digital channels (DVB-T) you need Resolution (HD) ones over DVB-S/S2, DVB-T a digital rooftop or indoor antenna (passive and DVB-C. or active indoor antenna with its own power At present, reception for these digital supply). television channels in High Definition is only T he antenna cable of the cable TV network possible in some countries in Europe. that broadcast in DVB-C must be plugged into Although this TV set meets the current DVB-S/ TV in order to receive the DVB-C broadcasts. S2, DVB-T and DVB-C standards as of April Unlike analogue broadcasting, not every 2013, its compatibility with future DVB-S/ channel has its own transmission frequency. S2 digital satellite broadcasts, DVB-T digital Instead, several channels are grouped into terrestrial broadcasts and DVB-C digital cable what are known as bouquets on a regional or broadcasts is not guaranteed. national level. This television can receive and process all You can find the current transmission analogue and all unencrypted digital stations. information on teletext from various channels, This television set has an integrated digital or look at the TV guide. -
Page 8: Important Notes On Environmental Protection
GENERALINFORMATION - ------------------------------------------------------------------ Notesonstillpictures Importantnoteson environmentalprotection Watching the same picture for a long time on the screen may cause a still image remains Those items mentioned below will help you feebly on the background. Feeble picture(s) reduce the consumption of natural resources on the background is originated from LCD/ as well as save your money by reducing LED technology and does not require any electricity bills. action under guarantee. To avoid such cases If you will not be using the TV set for several and/or minimize the impact, you may observe days, it should be disconnected from the the tips below. mains for environmental and safety reasons. Do not allow the same TV channel to stay on TV will not consume energy in this condition. the screen for a very long time. Channel logos If the TV set has main switch, it will be enough may cause this situation. to turn the TV off via main switch. TV will Do not allow the images, which are not full reduce energy consumption almost to Zero screen, to constantly stay on the screen; if Watt. not streamed in full screen format by the TV consumes less energy on stand-by mode. broadcaster, you can convert the images to However, some TV sets may have features full screen by changing image formats. such as on timer, that require the TV set to be Higher brightness and/or contrast values will left in standby to work correctly. lead this impact to appear faster; therefore, TV consumes less energy when brightness is you are recommended to watch your TV in... -
Page 9: Packagingcontents
PACKAGINGCONTENTS - --------------------------------------------------------------------- Manual Standardaccessories 1 2 Stand 3 Remote control 4 Battery for remote control 5 Screws and mounting instructions for stand 6 Quick Instruction Manual ENGLISH 9... -
Page 10: 10 Connection/ Preparation
CONNECTION/PREPARATION ----------------------------------------------------- Settinguporhanging S elect a location so that no direct sunlight falls on the screen. Settingupwithstand T o mount the stand, refer to the installation instructions included. P lace the TV set on a hard, level surface. Preparingformountingonthe VESAinstallationkit Contact authorised dealer to purchase the bracket. You will need the following: A pair of scissors, A cross-tip screwdriver. Follow the installation instructions for the VESA installation kit. 1 Place the TV set in the film on a smooth surface with the screen facing down. 2 Cut open the film on the back side using the scissors. 3 Connect the required cables to the connectors of television. Refer to "Connections" section in this manual. 4 Tie the cables so they do not hang down onto the floor. 5 Screw the VESA bracket onto the TV set and mount it according to its installation VESA instructions. -
Page 11: Connecting The Air And The Mains Cable
CONNECTION/PREPARATION ----------------------------------------------------- Connectingtheairandthemainscable 1 For digital satellite stations (DVB-S/S2) Note: plug the cable of satellite antenna into the When connecting an indoor antenna you antenna socket LNB on the television set; may have to try it out at different positions until you get the best reception. and / or 3 Plug the mains cable into the wall socket. 2a For terrestrial digital stations (DVB-T) plug the cable of the rooftop, indoor antenna Notes: (active or passive indoor antenna with its Make sure that the adaptor is connected to own power supply) into the antenna socket the TV before plugging in the power cable RF on the television set; Only plug the device into the mains socket after you have connected the external devices and the antenna. 2b For digital stations of the cable TV network Do not use an adapter plug or extension (DVB-C), plug the antenna cable into the cable which does not meet the applicable antenna socket RF on the television set; safety standards. Do not tamper with the power cable. 2c For analogue stations plug the antenna cable into the antenna socket RF on the television set. ENGLISH 11... -
Page 12: Inserting Batteries In The Remote Control
CONNECTION/PREPARATION ----------------------------------------------------- Insertingbatteriesintheremote Environmentalnote Make sure that the control exhausted batteries are disposed in accordance with the local laws and regulations. The symbol on the battery and package states that the battery supplied with this product should not be considered as a household waste. In some cases, this symbol might be used together with a chemical symbol. If the batteries contain mercury more than 0.0005% or lead more than 0.004%, a chemical symbol -Hg for mercury and Pb for lead- will be placed under the symbol. By ensuring proper disposal of these batteries, you will have contributed in prevention of potential hazards on the environment 1 Open the battery compartment by removing and human health that may arise from the lid. inappropriate disposal of the batteries. 2 Insert the batteries (2 x 1.5 V micro; for example R03 or AAA). Observe the polarity (marked on the base of the battery compartment). 3 Close the battery compartment. Note: If the television no longer reacts properly to remote control commands, the batteries may be flat. Be sure to remove used batteries. The manufacturer accepts no liability for damage resulting from used batteries 12... -
Page 13: Connections Of The Television Set
OVERVIEW -------------------------------------------------------------------------------------------------------------- Connectionsofthetelevisionset ENGLISH 13... -
Page 14: Buttons Of The Remote Control
OVERVIEW -------------------------------------------------------------------------------------------------------------- COAX: Coaxial audio output. Buttonsoftheremotecontrol : Headphone jack or external audio output. HDMI1: Input for digital audio and image data. HDMI2: Input for digital audio and image data. L NB: Satellite antenna input. R F: For antenna cable (terrestrial antenna or cable connection). Turns on the television in the stand-by MINI YPbPr IN: Component, audio/ mode and switches it to the stand-by mode. video inlet and outlet (3.5mm jack - with YPbPr converter cable). Turningonthetelevisionand M INI AV:Audio/video input for camera. switchingittostandbymode (3.5mm jack - with AV converter cable) 1 Press “ “to turn on the television in the CI: For CA modules for receiving stand-by mode. scramble channels. “ to switch the television to stand- 2 Press “ USB: USB socket for data media. by mode. 14... -
Page 15: Remote Control - Main Functions
OVERVIEW -------------------------------------------------------------------------------------------------------------- Remotecontrol-mainfunctions Turns on/off the television set (stand-by) Directly selects the channels S witches between teletext Opens the favourite list and TV modes. This button has no function Exits the menu. Displays information. Returns to the previous channel Opens the menu Opens the channel list Opens the electronic TV This button has no function guide Adjusts the volume. Signal source. Selects the channels step by step Sound on/off (mute). Previous, Next, Forward, Back; Double character, Edit, Stop, Answers in Teletext mode. Selects the picture format. Selects subtitles. Switches between TV channels/Radio channels. Opens Media Player menu. Selects audio channel. CursorControl Moves the cursor up and down in the menus. Moves the cursor left/right in menus. Opens channel list; activates various functions. -
Page 16: Remote Control - All Functions
OVERVIEW -------------------------------------------------------------------------------------------------------------- Remotecontrol-allfunctions S elects the previous track/previous picture in the file browser. S elects the next track/next picture in the file browser S tarts the backwards picture search in the file browser. S tarts the forward picture search in the file browser. S tarts playback in the file browser; P auses playback in the file browser. E nds playback in the file browser; 16 ENGLISH... -
Page 17: First Time Installation And Channel Search
SETTINGS ------------------------------------------------------------------------------------------------------------------ Selectinglanguage,countryand Firsttimeinstallationand operationmode channelsearch... 1 Press » « to switch on the television in This TV is equipped with a function that standby mode. searches the Satellite (DVB-S/S2), Terrestrial – T he »First Time Installation« menu is (DVB-T), Cable (DVB-C) and analog channels displayed when the TV is turned on for the automatically. first time. After you start searching and search for TV channels, the channels are saved in the Programme Edit and you can sort them as you First Time Installation wish in the Programme Edit. Menu Language English Varioussettings You can decide which channel type to search Country Turkey for depending on the antenna type connected to your TV. Auto. Search See page 18 for searching DVB-S/S2 – < > digital satellite TV channels. -
Page 18: Searching Television Channels With Satellite Signal
SETTINGS ------------------------------------------------------------------------------------------------------------------ Searchingtelevisionchannels 5 Press »OK« to start the search. – T he »Channel Tuning« menu will be withsatellitesignal displayed and the search for TV channels 1 In the »Tuning Setup« menu, select will start. < »Satellite« from »Scan Type« using » « or – S earch may take several minutes > » «. depending on the number of television channels received. Tuning Setup Note: The search can be aborted with »EXIT«. Tune Type 6 Press »EXIT« to end searching. Scan type Satellite Satellite TURKSA... Scan Mode Default Channel Type Free+Scramble Service Type... -
Page 19: Searching Terrestrial Digital Television Channels
SETTINGS ------------------------------------------------------------------------------------------------------------------ Searchingterrestrialdigital Searchingcabledigital televisionchannels televisionchannels 1 1 In the »Tuning Setup« menu, select »DVB-T« In the »Tuning Setup« menu, select »DVB-C« < > < > from »Scan Type« using » « or » «. from »Scan Type« using » « or » «. Tuning Setup Tuning Setup Tune Type Tune Type Scan type DVB-C Scan type DVB-T Scan Type Full Scan Type Full Network ID Auto Network ID... - Page 20 SETTINGS ------------------------------------------------------------------------------------------------------------------ 4 Press »OK« to start the search. – T he »Channel Tuning« menu will be displayed and the search for TV channels will start. – S earch may take several minutes depending on the number of television channels received. Note: The search can be aborted with »EXIT«. 5 Press »EXIT« to end searching. 20 ENGLISH...
-
Page 21: Changing Stored Channels For Digital Stations
SETTINGS ------------------------------------------------------------------------------------------------------------------ Deletingchannelsfromtheprogramme Changingstoredchannelsfor edit digitalstations 1 In the »Programme Edit« menu, use » « Channels found at the end of the search are or » « to select the channel to be deleted Λ stored in »Programme Edit«. and confirm with » « (Red). You can add the channels to your favourite list, 2 Press »EXIT« to quit the »Programme Edit«. change the order of the channels added to the Programme Edit, delete the channels that you do Movingthechannelsintheprogramme not need and skip certain preset channels. edittoadifferentposition In Programme Edit, press »CH-« to switch the (Satellite, Cable and Terrestrial channels except channel list to the next page, press »CH+« to from those disabled by the broadcaster) switch it back to the previous page. 1 In the »Programme Edit« menu, use » « or » « to select the channel to be moved and OpeningtheProgrammeEdit Λ confirm with » « (Yellow). 1... - Page 22 SETTINGS ------------------------------------------------------------------------------------------------------------------ CreatingafavouriteList You can select your favourite channels and save them as a list. Note: Press »FAV« to select the favourite list. 1 In the »Programme Edit« menu, press » « or » « to select the channel to be added Λ to the favourite list and then confirm with »FAV«. –The channel will be marked with »❤«. 2 Press »EXIT« to end searching. Note: You can delete channels from the favourite list. In the »Programme Edit« menu, press » « or » « to select the channel and Λ confirm with »FAV«. 22 ENGLISH...
-
Page 23: Picture Settings
PICTUREANDVOLUMESETTINGS - ------------------------------------------ Picturesettings Soundsettings 1 Press »MENU« to open the menu. 1 Press »MENU« to open the menu. < < 2 2 Select the »PICTURE« menu using » « or Select the »SOUND« menu using » « or > > » « and confirm your selection with »OK«. » « and confirm your selection with »OK«. – T he »PICTURE« menu is now enabled. – T he »SOUND« menu is enabled. Sound Mode Personal Picture Mode Personal Treble Contrast Bass Brightness Balance Colour SOUND... - Page 24 PICTUREANDVOLUMESETTINGS - ------------------------------------------ Automaticvolume The television channels broadcast at different volumes. The Auto Volume Level (AVL) Limiting function means the volume is kept the same when you switch between channels. 1 Select »Auto Volume Level« with » « or < > » « and select »On« with » « or » «. Λ ADSwitch(audiosubtitles) AD Switch is an additional audio channel for people who are visually impaired. The activities, surroundings, scene changes or the appearance, the gestures and facial expressions of the actors are described. This sound is transmitted at the same time as the normal sound with digital television stations. This depends on the programme being broadcast. 1 Select »AD Switch« with » « or » « and Λ < > select »On« with » « or » «. 2 Select »AD Switch Volume« with » « or <...
-
Page 25: Basic Functions
FUNCTIONINGOFTHETV-BASICFUNCTIONS - --- Basicfunctions Displayinginformation 1 Press »?« to display the information. Switchingonandoff – T he menu on the screen disappears automatically after a short while. 1 Press » « to switch on the television in standby mode. Audiolanguage 2 Press » « to switch on the television in You can select various languages when standby mode. watching digital channels. This depends on the programme being broadcast. Selectingchannels 1 Press » « to open the selection menu. 1 Use »1…0« to select channels directly. 2 Select your language using » « or » « Λ 2 Press »P+« or »P-« to select up and down and confirm with »OK«. channels. 3... -
Page 26: Changing The Picture Format
FUNCTIONINGOFTHETV-BASICFUNCTIONS - --- Changingthepictureformat The television automatically switches to the 16:9 format if this format is detected via the Euro-AV socket. 1 Select the picture format with » «. The selected picture format, for example »16:9«, appears on the screen. – Y ou can choose between the following picture formats: »Auto«format The picture format is automatically switched to »16:9« for 16:9 programmes. The picture format is automatically switched to »4:3« for 4:3 programmes. »16:9«format During programmes in 4:3 format, the picture is stretched horizontally if »16:9« is selected. The picture geometry is stretched horizontally. With actual 16:9 signal sources (from a set- top box on the Euro-AV socket) the picture fills the screen completely and with the correct geometry. »4:3«format The picture is shown in 4:3 format. »Zoom1«format Enlarges the picture once, being focused on the centre. »Zoom2«format Enlarges the picture twice, being focused on the centre. 26 ENGLISH... -
Page 27: Electronic Tv Guide
ELECTRONICTVGUIDE --------------------------------------------------------------------------- ElectronicTVguide The electronic 7 Day TV Guide offers an overview of all programmes that will be broadcasted in the next week (for digital channels only). 1 Press »GUIDE« to see programme information. Notes: Not all channels provide a detailed TV guide. Many broadcasters supply the daily programme but no detailed descriptions. There are broadcasters which do not provide any information at all. 2 Select the television channel with » « or » «. Λ – T he daily broadcast of the selected channel is displayed. > 3 Press » « to switch to today’s broadcasts. Notes: You can open and close the detailed programme information with »?«. Press » « (green) to add a reminder for the selected programme. Press » « (green) consecutively to select the reminder period. -
Page 28: Text Mode
TELETEXTMODE ------------------------------------------------------------------------------------------------ Additionalfunctions Textmode 1 Press »TXT« to switch to the Teletext mode. Enlargingcharactersize 2 You can select teletext pages directly with If you have difficulty reading the text on the »1...0« . screen, you can double the character size. To return to page 100, press »?«. 1 To enlarge the character size of a teletext 2 Press » « to scroll back one page. page, press » « repeatedly. 3 Press » « to scroll forward one page. Λ Pagestop Note: A multiple page may contain several sub- At the bottom of the screen, you will see an pages, which are automatically scrolled by the information line consisting of a red, green transmitting station. and, depending on the channel, yellow 1 Stop the sub-pages with » «. and blue text field. Your remote control has buttons with the corresponding colours. 2 Press » « to quit the function. Select the pages directly using these buttons. -
Page 29: The File Formats
USBMODE -------------------------------------------------------------------------------------------------------------- Thefileformats Picturedata Your television can display picture data in JPEG, Your television can be operated via the USB PNG and BMP formats. input with the following file formats: JPEG stands for Joint Picture Experts Group. This Videodata process is intended to compress picture files. Video compression / decompression (codec) PNG and BMP standards are designed to is intended for decreasing the storage area compress picture data without any losses. without sacrificing the picture quality. Picture files can be saved onto a data medium Your TV supports video data compressed along with other file types. with XVID, H.264/MPEG-4 AVC(L4.1, Ref. Such files can be organised as folders and Frames:4), MPEG-4, MPEG-2, MPEG-1, MJPEG, subfolders. MOV standards. File extensions that the device supports: “.avi”, “mkv”, “.mp4”, “.ts”, “.mov”, “.mpg”, “.dat”, ".vob". Format (codec) information is embedded within the file content and may differ depending on the file extension. “.avi”, “.mkv” or “.divx” files containing divx codec within are not playbacked. In addition to video data, these files also contain audio data compressed and "packaged" by using MP3. Audiodata Your television can play audio data coded with MP3 standards. MP3 stands for MPEG-1 Volume Level 3 and is based on the MPEG-1 standard developed by MPEG (Motion Picture Expert Group). These formats enable audio files to be saved on storage devices with a sound quality similar to that of a CD. -
Page 30: Connecting External Data Media
USBMODE -------------------------------------------------------------------------------------------------------------- Connectingexternaldatamedia It is advised to put the television on stand-by mode before connecting the External Data medium. Connect the device and then switch the television on again. Before disconnecting the data medium, the television must first be switched to standby, otherwise files can be damaged. Note: If you are using a power cable for the external hard disk that you have connected to the »USB« interface, then the power cable of the external hard disk must also be unplugged when the TV is turned off. You must not disconnect the USB Device from the TV while a file on the USB Device 1 Connect the »USB« interface of the is being read by the TV. television and the corresponding socket on the data device (external hard disk, digital A bi-directional data transfer as defined for camera, card reader or MP3 player) using ITE (Information Technology Equipment) a USB cable. devices in EN 55022/EN 55024 is not possible. USB transfer is not an operating mode in plug the memory stick into the »USB« USB itself. It is only an additional function. interface of the television. 30 ENGLISH... -
Page 31: The File Browser
USBMODE -------------------------------------------------------------------------------------------------------------- Thefilebrowser Playback–Basicfunctions The file browser displays the video, audio and 1 Press » « to select the data media and picture data that the external data medium select »USB« with » « or » « and select Λ provides. »OK« to confirm. – T he data media file browser will be If a data medium contains different file formats, displayed on the screen. you can deactivate data (Video file, Audio file, Picture file) you do not need for the playback 2 Select the format (Video file, Audio file, < > using a filter function. Image file, Text file) with » « or » «. 3 Select file overview with »OK«. < 1 Select the external data media using » « or > » « and confirm your selection with »OK«. – D ata media index list appears. <... -
Page 32: Additional Playback Functions
USBMODE -------------------------------------------------------------------------------------------------------------- Selectingaspectratio Additionalplaybackfunctions (only video files) Depending on the file formats used, the following 1 Press »?« during playback. additional functions are possible. – The control buttons will be displayed. Selectingatrackorpictureinsteps(SKIP) < > 2 Press » « or » « to select the »Aspect 1 During playback, select the next track/ Ratio« and then press »OK« repeatedly, picture you want with » «. set the picture ratio as »4:3«, »16:9«, »Zoom1«, »Zoom2« or »Auto«. 2 Select the previous track/picture with » «. – P layback begins with the track or picture Turnthepicturedisplay you selected. (only picture files) Searchingforward The pictures can be rotated by 90°. (only video and audio files) 1 During playback, press »?« to rotate the You can select different speeds (2x, 4x, 8x and pictures by 90°. 16x forwards or backwards). -
Page 33: Changing The Menu Language
LANGUAGESETTINGS - ---------------------------------------------------------------------------- 1 Changingtheaudiolanguage Press »MENU« to open the menu. < > 2 Select the »SETUP« menu using » « or » « (only for digital television channels) and confirm your selection with »OK«. You can assign primary and secondary audio – T he »SETUP« menu is now enabled. languages. 1 Press » « or » « to select the »Audio Λ Language« and confirm with »OK«. Menu Language English – The Audio Languages selection menu will TT Language English Audio Languages English be displayed. Subtitle Language English Hearing Impaired SETUP 2... -
Page 34: Time
TIMESETTINGS -------------------------------------------------------------------------------------------------- 1 Autostandby Press »MENU« to open the menu. < > 2 Select the »TIME« menu using » « or » « This function will switch the television to stand- and confirm your selection with »OK«. by mode in 4 hours if the television does not – T he »TIME« menu is now enabled. receive any picture signals for 5 minutes or according to European regulations, if no key on the keyboard of the TV or the remote control is pressed. Time 13/April 13:18 1 Select »Auto Standby« using » « or » « Λ Time Zone GMT+2 Sleep Timer and confirm with »OK«. TIME Auto Standby Sleep timer for OSD menu 30 S 2... -
Page 35: Menu Lock
LOCKSETTINGS ----------------------------------------------------------------------------------------------- ChangingthePINcode 1 Press »MENU« to open the menu. < > 2 Select the »LOCK« menu using » « or » « Instead of the default code »0000«, you can enter a personal code. and confirm your selection with »OK«. – T he »LOCK« menu is now enabled. Please take note of your personal code. Press » « or » « to select the »Set Password« Λ and confirm with »OK«. 5 Use »1...0« to enter your current four-digit System Lock Set Password PIN code. Channel Lock LOCK Parental Guidance – » Enter New Password« is now enabled. Key Lock Hotel Mode 6... -
Page 36: Watching A Blocked Television Channel
LOCKSETTINGS ----------------------------------------------------------------------------------------------- Watchingablockedtelevision Lockingthecontrolpanel channel (parentalcontrol) You can watch a TV channel blocked with PIN If the control panel lock is activated, the buttons code by selecting the TV channel and entering on the television do not work. the PIN code. 1 In the »LOCK« menu, press »OK« and enter 1 Select the blocked channel with »1…0« or the PIN code »0000« using »1...0« buttons »P+«, »P–«. on the displayed password screen. 2 2 Enter the PIN code »0000« using »1...0« Use » « or » « to select »Key Lock« and Λ < > buttons on the displayed password screen. use » « or » « to enable (On) or disable – B locked channel can be viewed. (Off) the key lock. Note: 3 Press »EXIT« to finish the setting. Channel will be blocked again when you change the channel. ParentalGuidance There are movies which contain contents or scenes which are not suitable for children. -
Page 37: Software Update (Usb)
OTHERSETTINGS - ------------------------------------------------------------------------------------------- 1 Press »MENU« to open the menu. < > 2 Select the »SETUP« menu using » « or » « and confirm your selection with »OK«. – T he »SETUP« menu is now enabled. Menu Language English TT Language English Audio Languages English Subtitle Language English Hearing Impaired SETUP PVR File System Aspect Ratio 16:9 Blue Screen First Time Installation Reset Software Update (USB) HDMI CEC... -
Page 38: Hdmi Cec
USINGEXTERNALDEVICES - -------------------------------------------------------------- HDMICEC Switchingoffthedevicefromstandby mode Your television is equipped with HDMI CEC After switching your television to standby, your feature. This feature utilizes CEC (Consumer external device (e.g. DVD player) will also Electronics Control) protocol. CEC allows you switch to standby if it is on. to make an HDMI connection between your TV and DVD player, STB or video recorder and HDMI CEC is always active on your television. control such equipment with the remote control Refer to the user manual of your external device of the television. This feature must be supported to learn how to activate this feature on it. by the device you connect as well. Searchingandselectingtheactive Your television supports the following functions. For detailed information about this function, externaldevice read the user manual of the external device. 1 Press »MENU« to open the menu. < > 2 Select the »SETUP« menu using » « or » « HDMICECconnectionfunctions and confirm your selection with »OK«. ofthetelevision – T he »SETUP« menu is now enabled. Switchingontheexternaldevicefrom... -
Page 39: High Definition - Hd Ready
USINGEXTERNALDEVICES - ------------------------------------------------------------ Connectionoptions Which television socket(s) you connect your external devices to depends on the sockets the external device is equipped with and HDMI, the HDMI logo and High-Definition the signals which are available. Multimedia Interface are trademarks or registered Note that with many external devices trademarks of HDMI Licensing LLC. the resolution of the video signal must be adapted to the input sockets on the Highdefinition–HDready television (check the external device’s instruction manual). You can find out which Your television can playback high-definition television signals (HDTV). values you need to set by referring to the guidelines in the section about connection You can connect the input sources (HDTV set- options. top box or High Definition DVD player) to the »HDMI« socket (digital HDTV signal). Do not connect any other equipment while the device is switched on. Switch off the This ensures that you can view digital HDTV other equipment as well before connecting programmes, even if they are copy-protected (HDCP High Bandwidth Digital Content Only plug the device into the mains socket Protection). after you have connected external devices. ENGLISH 39... -
Page 40: Connecting An External Device
USINGEXTERNALDEVICES - ------------------------------------------------------------ Connectinganexternaldevice ConnectingaDVDrecorder,DVD player,videorecorderorset-topbox Withadigitalaudio/videosignal 1 Switch on the video recorder, DVD player Suitable devices: Digital satellite receiver, or set-top box and select the function you wish to use. Playstation, BluRay player, DVD player/ recorder, set-top box, notebook, PCs. 2 Press » «, use » « or » « to select the Λ Video signal: digital image; definition: input signal »AV«, »Component«, »HDMI1« standard 576p; HDTV 720p, 1080i, 1080p. and »HDMI2« confirm with »OK«. Audio signal: digital audio (stereo, multi- channel compression, uncompressed). Headphones »HDMI1« or »HDMI2« channel position. 1 Connect the »HDMI1« or »HDMI2« socket Connectingheadphones on the television and the corresponding 1 Plug the headphone jack (3.5 mm jack HDMI socket on the external device using plug) into the headphone socket of the a standard HDMI cable (digital video and television. audio signal). Note: Prolonged listening at loud volumes with the Withananaloguevideosignal... -
Page 41: What Is Common Interface
OPERATIONWITHCOMMONINTERFACE - -------------------- WhatisCommonInterface? AccesscontrolforCAmodule andsmartcards Common Interface (CI) is an interface for DVB receivers. 1 Press »MENU« to open the menu. Scrambled channels can only be viewed with < > 2 Press » « or » « to select the »Channel« a CA module suitable for the encoding system menu and press »OK« to confirm. and the corresponding smart card. – » CHANNEL« menu is now enabled. The television set is equipped with a Common 3 Press » « or » « to select »CI Λ Interface slot into which CA modules from Information« and confirm with »OK«. various providers can be inserted. Notes: You can insert the provider’s smart card This menu give operating instructions and – into the CA module in order to enable the after you enter your PIN code – access to scramble channels you want to see. channels of the PAY-TV provider. InsertingtheCAmodule Other settings are described in the manuals for your CA module and smart card. -
Page 42: Searching For All Digital Television Channels From A Satellite Automatically
DETAILEDCHANNELSETTINGS ---------------------------------------------------- 8 Searchingforalldigital Select »Channel Type« using » « or » «. Λ < > Press » « or » « to select whether you televisionchannelsfroma want to search for only free digital television satelliteautomatically channels (Free), only scrambled digital New satellite channels are added or satellite television channels (Scramble) or the both data is changed frequently. Therefore, we (Free+Scramble). recommend you to run auto search function from Note: time to time. If some of the frequencies are not stored All transponders are scanned for new channels. completely due the changes in satellite 1 Open the »Input Source« menu with » «. parameters made by the broadcaster, it is recommended to set the »Network Settings« 2 Select »SATELLITE« using » « or » « and Λ option to »Network«. confirm with »OK«. 9 Select »Service Type« using »... -
Page 43: Searching For Digital Television Channels From A Satellite Manually
DETAILEDCHANNELSETTINGS ---------------------------------------------------- Searchingfordigitaltelevision 9 Select »Channel Type« using » « or » «. Λ < > Press » « or » « to select whether you channelsfromasatellite want to search for only free digital television manually channels (Free), only scrambled digital If a certain channel cannot be found with television channels (Scramble) or the both automatic search, you can search it manually (Free+Scramble). by manual search function. You must enter all Note: parameters of the channel correctly. You can If some of the frequencies are not stored obtain the current transponder information completely due the changes in satellite from teletext page, satellite TV magazines or parameters made by the broadcaster, it is Internet or you can search by selecting from the recommended to set the »Network Settings« transponder list that already exists in the TV. option to »Network«. 1 Press »MENU« to open the menu. 10 Select »Service Type« using » « or » «. Λ <... -
Page 44: Lnb Settings
DETAILEDCHANNELSETTINGS ---------------------------------------------------- LNBSettings DiSEqC1.1 DiSEqC 1.1 switch allows for receiving from 1 Press »MENU« to open the menu. maximum sixteen satellites at the same time. < > 2 Press » « or » « to select the »CHANNEL« In »LNB Selection«, make selections menu and press »OK« to confirm. between »LNB1« and »LNB16« for the – » CHANNEL« menu is now enabled. satellite that corresponds to the relevant < > DiSEqC position with » « or » «. 3 Select »Dish Antenna Setup« using » « or » « and confirm with »OK«. Λ Motor – » Dish Antenna Setup« menu will be Your television supports DiSEqC 1.2 displayed. motorized satellite systems. This feature allows to control the satellite through your 4... -
Page 45: Motorized Antenna Setup (Diseqc 1.2)
DETAILEDCHANNELSETTINGS ---------------------------------------------------- Motorizedantennasetup LimitSetting – » Move Motor«: Move the antenna in the (DiSEqC1.2) < > east or west direction with » « or » «. Note: – » Move Step«: Move the antenna in the The LNB settings explained in the section east or west direction step by step with < > below requires expertise in satellite systems. » « or » «. Contact your authorized dealer about this – » Set West Limit«: Sets the limit that the matter. antenna can move at most in the west direction. Your television supports DiSEqC 1.2 motorized – » Set East Limit«: Sets the limit that the satellite systems. This feature allows to control antenna can move at most in the east the satellite through your television. direction. -
Page 46: Searching For Digital Television Channels Through Cable Automatically
DETAILEDCHANNELSETTINGS ---------------------------------------------------- Searchingfordigitaltelevision 8 Select »Tune Type« with » « or » « and Λ < > select »DTV« with « or » «. channelsthroughcable automatically 9 Select »Scan Type« using » « or » « and Λ < select (»Network Scan« or »Full«) with » « 1 Open the »Input Source« menu with » «. > or » «. 2 Select »DTV« using » « or » « and Λ – » Network Scan« scanning function sets confirm with »OK«. the channels according to the cable operator information in the broadcasting 3... -
Page 47: Searching For Digital Television Channels Through Cable Manually
DETAILEDCHANNELSETTINGS ---------------------------------------------------- Searchingfordigitaltelevision Searchingfordigitaltelevision channelsthroughcable channelsthroughaerial automatically manually 1 1 Open the »Input Source« menu with » «. Open the »Input Source« menu with » «. 2 2 Select »DTV« using » « or » « and Select »DTV« using » « or » « and Λ Λ confirm with »OK«. confirm with »OK«. 3 3 Press »MENU« to open the menu. Press »MENU« to open the menu. < > < > 4 4 Press » « or » « to select the »CHANNEL« Press » « or »... -
Page 48: Manual Searching For Digital Television Channels With Aerial Connection
DETAILEDCHANNELSETTINGS ---------------------------------------------------- 8 Select »Tune Type« with » « or » « and Λ Manualsearchingfordigital < > select »DTV« with « or » «. televisionchannelswithaerial 9 Press »OK« to start the search. connection – T he »Channel Tuning« menu will be 1 Open the »Input Source« menu with » «. displayed and the search for TV channels 2 will start. Select »DTV« using » « or » « and Λ – S earch may take several minutes confirm with »OK«. depending on the number of television 3 Press »MENU« to open the menu. channels received. < > 4... -
Page 49: Tuning Analogue Television Channels
DETAILEDCHANNELSETTINGS ---------------------------------------------------- Tuninganaloguetelevision Tuning Setup channels This setting is only necessary if you have not Country Turkey carried out an analogue search during the first Tune Type time installation. Scan type DVB-T The television channel can be set directly or using the search. Scan Type Full Network ID Auto Switchingthetelevisiontoanalogue channels Frequency Auto Note: Symbol Rate Auto Analog channels can only be selected while »Air« or »Cable« sources are active. Back Start MENU ENTER 1 Open the »Input Source« menu with » «. -
Page 50: Displaying Signal Information
DETAILEDCHANNELSETTINGS ---------------------------------------------------- Tuningtheanaloguetelevisionchannels Note: byenteringthechannelnumbers When fine tuning is required, select »Fine- < Tune« with « or » « and tune with » « Λ 1 Press »MENU« to open the menu. > or » «. < > 2 Press » « or » « to select the »CHANNEL« Note: menu and press »OK« to confirm. To set other television channels, repeat – » CHANNEL« menu is now enabled. steps from 4 to 7. 3 Press » « or » « to select »ATV Manual Λ 8 Press »EXIT« to finish setting. Tuning« and press »OK« to confirm. – » ATV Manual Tuning« menu will be Displayingsignalinformation displayed. -
Page 51: Service Information For Dealers
INFORMATION ------------------------------------------------------------------------------------------------- Serviceinformationfordealers Disposingofthepackaging This product complies with the The packaging materials are dangerous for following European directives children. Keep the packaging materials out of the and regulations: 2006/95/EC: reach of children. Electrical equipment directive The packaging of the product is manufactured from for use within a certain voltage recyclable materials. Dispose of by classifying in range. accordance with waste regulations. Do not dispose 2004/108/EC: Directive on electromagnetic along with normal household waste. suitability. Maintenance 2009/125/EC: Directive relevant for eco-design for energy using product and related; ConformitywithWEEERegulationsand 278/2009: Regulation regarding eco friendly DisposingofWasteProduct design requirements regarding energy consumption This product does not contain hazardous and of uncharged external power sources and average prohibited substances specified in the "Regulations active efficiency (for models with AC/DC adapters); for Supervision of Waste Electrical and Electronic 642/2009 Regulation regarding environmentally- Equipment" Published by Turkish Ministry of conscious design requirements for TVs. Environment and Urban Planning. Conforms to the 2 010/30/EU: Directive on energy labeling of the WEEE Regulation. This product has been made products that work on energy and the following; from high-quality parts and materials which can 1 062/2010: Regulation on energy labeling of be recycled and re-used. Therefore, do not throw TVs. -
Page 52: Troubleshooting
INFORMATION ------------------------------------------------------------------------------------------------- Troubleshooting If the remedies given below do not work, please consult an authorised service. Please bear in mind that malfunctions can also be caused by external devices such as video recorders or satellite receivers. Problem Possiblecause Remedy Screen lit (snow), but no Antenna cable Is the antenna cable connected? channels No TV channel programmed Start the channel search Low picture contrast Picture settings incorrectly set Adjust the brightness, contrast or colour setting Problem at channel Test with a different channel Interference to picture Interference from other devices Change the position of the device and/or sound Ghosting, reflection Channel tuning Automatic or manual channel tuning/fine-tune Antenna Have antenna cable or system checked No colour Colour intensity at maximum Turn up the colour TV standard setting (if setting Select the correct colour standard option is available) Problem at channel Test with a different channel Picture but no sound Volume set to minimum Turn up or switch on the volume... - Page 53 GLOSSARY - ------------------------------------------------------------------------------------------------------------- The television may not have all of the JPEG specifications below. It may vary by the model JPEG stands for Joint Picture Experts Group. of the television. It is the process where the picture data are compressed. CommonInterface It is an interface used in DVB receivers. Scrambled channels can only be viewed with The Low Noise Block resides at the center of a CA module suitable for the encoding system parabolic antenna. and the corresponding smart card. For example: It implements the satellite frequencies that are between 10.7–11.75 or 11.8–12.75 GHz in 950 to 2150 MHz and This feature utilizes CEC (Consumer Electronics ensures cable transmission with coaxial cables Control) protocol. (and with fiber-optic cables recently) and CEC enables external devices that are reception with satellite receivers. connected to the HDMI socket with the HDMI cable to be controlled via the remote control. Compressed audio file format. DiSEqC DiSEqC (Digital Satellite Equipment Control) is NoiseReduction a digital system that ensures that the motorized Reduces the "snow" areas by displaying the multiple-LNB satellite systems are controlled. picture a bit sharper and creating a slight blur. Thus, it must be used as little as possible with DiSEqC is required when two or more satellite good picture material. locations need to be controlled.
- Page 54 INDEX - --------------------------------------------------------------------------------------------------------------------------- Numbers Connecting external data media..30 Connecting headphones..40 »4:3« format..26 Connecting the air and the mains cable..11 »16:9« format..26 Connection options..39 Connections of the television set..13 Creating a favourite list..22 Access control for CA module and smart cards..42 Additional functions..28 Deleting channels from the programme Additional playback functions..32 edit..21 Adjusting the audio format..40 Digi Link connection functions of TV..38 Adjusting the volume..25 Displaying information..25 Adjusting the volume or changing the chan- Displaying signal information..51 nel..14 Disposing of the packaging..52 AD Switch (audio subtitles)..24 Audio data..29 Audio language..25 ELECTRONIC TV GUIDE..27 »Auto« format..26 Electronic TV guide..27 Automatic volume..24 Enlarging character size..28 Auto standby..34 Environmental warning..52 Explanation of the symbols which may be pre- sent on back side of the television set..52 Balance..23 Basic functions..25 Bass..23 First time installation and channel search..17...
- Page 55 INDEX - --------------------------------------------------------------------------------------------------------------------------- Searching for digital television channels through aerial automatically..48 Manual searching for digital television channels Searching for digital television channels through with aerial connection..49 cable automatically..47 Motorized antenna settings Searching for digital television channels through (DiSEqC 1.2)..46 cable manually..48 Move to desired time..32 Searching forward..32 Moving the channels in the programme edit to a Searching television channels with satellite different position..21 signal..18 Muting..25 Searching terrestrial digital television chan- nels..19 Selecting aspect ratio..32 Notes on still pictures..8 Selecting a track or picture in steps (SKIP)..32 Selecting AV channels..25 Opening the Programme Edit..21 Selecting channels..25 OPERATION WITH COMMON INTERFA- Selecting channels from lists..25 CE..42 Selecting language, country and operation mode..17 Selecting the channel position for the PC..41 PACKAGING CONTENTS..9 Selecting the HDMI source from the televisi- Page stop..28 on..38 Parental Guidance..35, 36 Selecting the menu language..38 PCB Conformity:..52 Service information for dealers..52...
- Page 56 INDEX - --------------------------------------------------------------------------------------------------------------------------- TELETEXT MODE..28 Text mode..28 The file browser..31 The file formats..29 The main menu of the file browser..31 Time Zone..34 Treble..23 Troubleshooting..53 Tuning analogue television channels..50 Tuning the analogue television channels by entering the channel numbers..51 Turning on the television and switching it to standby mode..14 Turn the picture display..32 USB MODE..29 USING EXTERNAL DEVICES..38 Using the Euro/AV socket..40 Video data..29 Watching a blocked television channel..36 What is Common Interface?..42 With a digital audio/video signal..40 With an analogue video signal (progressi- ve)..40 56 ENGLISH...