Table of Contents
Advertisement
To deactivate the function: the hob must be
deactivated. Touch
flashes. Touch
.
seconds.
To override the function for only one
cooking time: activate a cooking zone.
comes on. Touch
comes on for all zones. Set the heat setting
in 4 seconds. You can operate the hob.
When you deactivate the appliance the
function operates again.
6.12 OffSound Control (Deactivation
and activation of the sounds)
Deactivate the hob. Touch
Touch
for 3 seconds.
Touch
of the timer to choose one of the
following:
•
- the sounds are off
•
- the sounds are on.
To confirm your selection wait until the hob
deactivates automatically.
When the function is set to
the sounds only when:
• Minute Minder comes down
• Count Down Timer comes down
• you put something on the control panel.
6.13 Hob²Hood
It is an advanced automatic function which
connects the hob to a special hood. Both the
hob and the hood have an infrared signal
communicator. Speed of the fan is defined
automatically on basis of mode setting and
temperature of the hottest cookware on the
hob. You can also operate the fan from the
hob manually.
For most of the hoods the remote system
is originally deactivated. Activate it before
you use the function. For more
information refer to hood user manual.
Operating the function automatically
To operate the function automatically set the
automatic mode to H1 – H6. The hob is
for 4 seconds until
comes on for 4
for 4 seconds until
for 3 seconds.
or
comes on.
you can hear
originally set to H5. The hood reacts
whenever you operate the hob. The hob
recognizes temperature of the cookware
automatically and adjusts the speed of the
fan.
Automatic modes
Automat‐
ic light
Mode H0
Off
Mode H1
On
3)
On
Mode H2
Mode H3
On
Mode H4
On
Mode H5
On
Mode H6
On
1)
The hob detects the boiling process and activates
fan speed in accordance with automatic mode.
2)
The hob detects the frying process and activates fan
speed in accordance with automatic mode.
3)
This mode activates the fan and the light and does
not rely on the temperature.
Changing the automatic mode
1. Deactivate the appliance.
2. Press
until you hear a beep and keep
it pressed until you hear the second beep.
3. Press
for 3 seconds until
comes on.
4. Press
until H and a digit (0 - 6) comes
on. H5 is the default setting.
5. Press
of the Timer to select the
desired mode (H0 - H6). The chosen
mode activates automatically after 10
seconds.
To operate the hood directly on the hood
panel deactivate the automatic mode of
the function.
Boiling 1)
Frying 2)
Off
Off
Off
Off
Fan speed
Fan speed
1
1
Off
Fan speed
1
Fan speed
Fan speed
1
1
Fan speed
Fan speed
1
2
Fan speed
Fan speed
2
3
or
ENGLISH
15
Advertisement
Table of Contents
