Sony ILCE-9M3 Help Manual page 324

Interchangeable lens digital camera

Hide thumbs Also See for ILCE-9M3:

Table of Contents

Interchangeable Lens Digital Camera

Starting tracking with touch operations (Touch Tracking)

You can use touch operations to select a subject you want to track in the still image shooting mode and movie recording

Configure the settings as follows from MENU →

[Touch Operation]: [On]

[Touch Panel Settings] → [Shooting Screen] → [Shooting Screen]: [On]

(Setup) → [Touch Operation] → [Touch Panel Settings] → [Shooting Screen] → [Touch Func.

in Shooting] → [Touch Tracking].

Touch the subject that you want to track on the monitor.

Tracking will start.

When shooting with the viewfinder, you can use the touch pad to select a subject you want to track.

To cancel tracking, touch

If you set [Touch Func. in Shooting] to [TouchTracking+AE], the brightness will be set according to the subject you touched. This

will also allow you to fine-tune the brightness by sliding the brightness adjustment bar that appears after touching.

[Touch Tracking] is unavailable in the following situations:

When the focus mode is set to [Manual Focus] in the still image shooting mode.

When using Smart Zoom, Clear Image Zoom, or Digital Zoom in the still image shooting mode

If the focus mode is switched to [Manual Focus] while [Touch Func. in Shooting] is set to [Touch Tracking] in still image shooting

mode, the setting value for [Touch Func. in Shooting] will be changed to [Touch Focus].