Sony ILCE-9M3 Help Manual page 357

Interchangeable lens digital camera
Hide thumbs Also See for ILCE-9M3:
Table of Contents

Advertisement

Help Guide
Interchangeable Lens Digital Camera
ILCE-9M3
α9III
Flash Timing Setting
Sets whether to fire the flash and adjust the flash timing manually.
If high-speed sync flash firing does not provide enough light, you can shoot with a more appropriate amount of light by
adjusting the timing of the flash to match the exposure timing of the camera.
MENU →
(Exposure/Color) → [Flash] → [Flash Timing Setting] → [On] → Set the flash timing to the
1
desired value.
The flash will start firing earlier according to the set amount of time.
Menu item details
On:
Adjusts the flash timing manually. (0 microseconds to 1000 microseconds)
Off:
Does not adjust the flash timing.
Hint
You can adjust the flash timing during actual shooting by assigning [Flash Timing Adjust.] to the desired dial using [
Key/Dial Set.] or [My Dial Settings].
The [Flash Timing Setting] setting also applies to flashes connected to the
Note
If the shutter speed of the camera is shorter than the flash duration, the amount of light reflected in the exposure will be small. In
this case, set the light amount to a larger value and readjust the flash timing.
Even if the flash you use is the same, the proper flash timing will vary depending on shooting conditions such as distance to the
subject, etc. When the shooting conditions change, adjust the flash timing again before shooting.
When [Flash Timing Setting] is set to [On], the brightness may change with each shot depending on the camera and flash
settings. You may be able to reduce variations in brightness by shooting as follows.
Increase the light intensity of the flash.
Decrease the shutter speed.
Increase the interval between shots.
Changing the flash timing may change the color tone. In this case, adjust the color tone with the custom white balance.
When [Flash Timing Setting] is set to [On], high-speed flash sync is not available.
Related Topic
Assigning frequently used functions to buttons and dials (Custom Key/Dial Set.)
(flash sync) terminal.
357
Custom
TP1001273214

Advertisement

Table of Contents
loading

Table of Contents