Onkyo DX-C206 Instruction Manual page 9

To start from a specific track
DISC SKIP
NEXT SELECTION
OM HRW
[
During stop:
'Ui Please make sure that the MEMORY indicator is not lit.
@ When the MEMORY indicator is on, press the MEMORY button
to turn the indicator off.
2) Select the desired disc with the DISC SKIP (-. +) button.
@ When you press the PLAY ™ button, playback will start with
the first track on the selected disc.
'3' Use the mt button or the << button to select the desired track.
and press the PLAY ™ button.
@ For the DX-C206. the Number buttons on the remote control
can be used to select the desired track,
Use +10 button to select a track with a track number of 10 or
higner. For example. to select Track Number 30. press this
button three times. and then press 0.
—
~ "/
To select the next desired track during the playback
(L Press the NEXT SELECTION button.
@ If you do not operate within approximately 8 seconds, it will be
cancelled. !n such a case. press the button again.
To move forward or backward quickly during playing
To return to the beginning of the track during playing or
to skip to the next track
co
WUNHYE)
<< > PI
To skip to the next track. press the ms) button.
@ The playing of the current track is interrupted and the pickup moves
to the beginning of the next track. During memory play the pickup
moves to the beginning of the next track in memory.
«+ NEXT | "lights
+"—": flashes
'2: Select the desired disc with the DISC SKIP (-. +) button .
®@ If you select a track of a disc being played. this operation is not
necessary.
3) Use the ppe| button or the |«q<q button to select the desired track.
@® Forthe DX-C206 the Number buttons on the remote control can
be used to select the desired track.
Next track nur ber
The next selected D'SC No.
@ When the track which has been playing Is finished. the track of
the disc selected using the NEXT SELECTION button will then
be played. The other functions are the same as normal play.
When playback of the last track has finished. the unit stops.
® To play the next selected disc normaily. from the beginning to
the end, you must do one of the following after operation 2"
> Press number °0" button on the remote control.
> Press NEXT SELECTION button again.
* Nothing will operate for ihe next 8 seconds.
NOTE:
lf the disc which has been selected is notin the Disc Tray. the next
disc is played in the normal way. starting from the beginning. If a
track which is not on the disc is selected. the disc which was
| designated is played inthe normal way. starting from the beginning.
Press the i button to fast forward.
Press the <#@ button to fast backward,
® The pickup continues to move rapidly forward or backward as long
as you hold down the ™® button or ~# button.
@ |f you fast forward all the way to the end of the disc. the next disc
iS played.
® During memory play. when the pickup is forwarded to the end of the
current track by pressing the ™® button. the pickup comes to the
next programmed track and norma playback begins. When the ~<d
button ts pressed. the pickup comes to the beginning of the current
track and nermai playback begins from this position.
@ During random play. when the pickup is forwarded to the end of the
current track by pressing the i button. the random play starts
again.
@ The pickup moves ahead one track each time you press the >|
button,
@ During random play. the pickup skips to the beginning of next
randomly selected track of a random disc.
To return to the beginning of the track during playing. press the |<<
button.
@ The playing is interrupted and the pickup moves back to the
beginning of the current track.
@ (if you press the |< button again before the pickup reaches the
beginning of tne current track or you press the | button twice in
arow. the pickup goes to the beginning of the previous track. During
memory play the pickup goes to the beginning of the preceding
track in memory.
@ During random play. the pickup skips to the beginning of the current
track.