Onkyo DX-C206 Instruction Manual page 8

Operations
To Load and Play a Disc (Normal Play)
qd) POWER DISPLAY
(3) DISC SKIP
()(4) OPEN/CLOSE &
(6) PLAY
'D Press the POWER switch to turn on the power,
When the power is turned on, the carousel rotates to find the
position of a disc and stops automatically if there is adisc onthe disc
tray. If the OPEN/CLOSE & button is pressed immediately after
the power has been turned on the carousel does not rotate.
=.
\¢' Press the OPEN/CLOSE & button to open the loading drawer.
\ fo 7 'y f i \
ai ! : - oa i i !
ee i
PON Cp
ae a
= i
| Esa oa oe a
| —
|
'3 Put the disc(s} in the Disc Tray(s} with labels facing up.
@ Pressing the DISC SKIP (-. +} button rotates the carousel so
that you can load discs in the other disk trays.
Frort pasit-on
4 Press the OPEN/CLOSE button again to close the loading
drawer.
® The disc in the front position is ready to play. If there is no disc
in the front oasition of the carousel, the unit rotates to the next
Disc Tray until it finds a disc to play. The Disc Tray number with
no disc in its tray disappears from the display.
The total number of
tracks on the disc.
Ali of the track numbers
on the disc light.
I
The total playing time of the disc.
(6) PAUSE II
(7) STOP &
& Press the PLAY ® button
@ The Disc No. and the track number on the Music Calender
display are surrounded by squares and start playing.
be _— 1 __. a
The elapsed time of the current track in play.
The display can be changed by DISPALY
button.
® If you put the discs in the disc trays and press the PLAY
button instead of the OPEN CLOSE & button. the carousel
turns and the disc which you put in front position while the
drawer was opened starts to play.
® After alithe discs on the carouse! have been played. the display
resets to its inital condition when the discs were loaded.
Press the PAUSE Wi button to stop the performance temporarily.
@ The PAUSE indicator lights and the playing stops temporarily.
® Toresume playing. pressthe PLAY ™ button. The playing starts
up again from exactly where it left off.
To stop playing. press the STOP I button.
@® When the loading drawer is open. the disc which has been
played cames into the front position.
Changing the display
Press the DISPLAY button during playing to switch the display
shown in the Time Display among the following three types:
@ SINGLE ELAPSED
shows how long the current track has been playing.
SINGLE REMAIN
Shows how much time is left for the track currently playing.
TOTAL REMAIN
Shows how much playing time is left for the entire disc.
During memory play. this display shows the playing time re-
maining for the entire sequence of tracks programmed into
memory.
NOTE: -—— —,
For a track beyond the 20th. the remaining time (SINGLE REMAIN) |
| of the Time display snows "— -: - —". |
Le