Table of Contents
Advertisement
CONNECTING THE DVD TO A TV USING THE Y/PB/PR JACKS
To
Component
Video In
Y(
Audio Cable (Included)
Component Cable
(Not Included)
[
From 1
/
——*
jAudio
I
□
n From
?
n
Compontwit
H
/
j
Video Oul
-
.(W.
©
NOTES FOR CONNECTING TO A TV:
•
TV must have Y, PB and PR input jacks.
Set the VIDEO OUT Option (on the GENERAL Menu Page) to YUV if using the component Video Out jacks.
When connecting the DVD, refer to the owner's manuai of the TV, as well as this manual.
unplugged before making any
diTrS
nf/n'
™
''
"'®
®
playback picture will be
distorted because DVD video discs are copy protected.
•
If using a TV with a blue screen option, turn the option off on the TV for best results.
PROGRESSIVE (Y,
Pb,
Pr) VIDEO OUT:
Use-those
to connect to a TV with progressive video input jacks, set the PROGRESSIVE SCAN switch to ON
Progressive scan is a video scanning system that displays all lines in a frame in one pass, as opposed to the traditional
system, interlaced scan. This connection provides optimum quality. To ensure maximum picture quality, use three video¬
grade cables for connections. Note that it is essential to match the color-coded connectors with a compatible TV.
525 LINE DIGITAL PROGRESSIVE-SCAN COMPONENT VIDEO OUTPUT
nr°mnnitn?
video, progressive scan effectively doubles the amount of video information fed to your TV
or monitor. The result is a stable, flicker-free image. (Check your TV/monitor for compatibility with this feature )
hor the very highest picture quality, try watching a movie on DVD-Video on a progressive-scan compatible TV.
NOTES:
^ ^
compatible with a progressive scan signal and set the PROGRESSIVE SCAN switch is
Ihfp^OGRES^VF qrAN
^^e unit off and set
.
°
position. Then, turn the unit on and the picture will appear.
SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE
I^AY cause artifacts to be DISPLAYED IN THE PICTURE IN CASE OF 525
SCAN Sh TO ^OFF™AT THE USER SET rHE PROGRESSIVE
10
Advertisement
Table of Contents
