CONNECTION
CONNECTING THE DVD TO A TV USING THE AUDIO/VIDEO OUTPUT JACKS
CONNECTING THE DVD TO A TV USING THE S-VIDEO OUTPUT JACK
NOTES FOR CONNECTING TO A TV:
•
If your TV has an S-Video input, connect the DVD player with the S-Video cable for best results.
•
When connecting the DVD, refer to the owner's manual of the TV, as well as this manual.
•
When connecting the DVD to the TV, make sure the power is off and both units are unplugged before making any connections.
•
If your TV only has one audio input, the use of a "Y" connector may be necessary. Visit your local electronics supply store.
•
Connect the DVD player to your TV directly. If you connect the DVD player through a VCR, the playback picture will be
distorted because DVD video discs are copy protected.
•
Set the VIDEO OUT Option (on the GENERAL MENU Page) to S-VIDEO if using S-Video.
•
After connecting, press the AUDIO MODE button to the desired audio setting.
9