Table of Contents
Advertisement
ENGLISH
Presetting radio stations
¢ You can store up to 30 preferred stations in the
memory.
Tune in the desired station with auto or
manual tuning, etc.
Listening to FM stereo broadcasts
» While listening to FM broadcasts.
FM MODE
i
Press the MEMORY/ENTER button.
MEMO / ENTER
i
* "MEMORY" is flickering for 5 seconds.
Examples)
¢ For "3":
The station has now been stored in the memory
« A stored frequency is erased from the memory by
storing another frequency in its place.
¢ If "MEMORY" goes off, press the MEMORY/ENTER
button again to enter a preset number.
Enter a preset number (1~30).
* Each time this button is pressed, the FM mode
changes as follows;
Stereo mode : "ST" lights up
Mono mode : "ST" goes off a
« When FM stereo broadcasts are poor because of weak
broadcast signals, select the FM mono mode to reduce
the noise, then FM broadcasts are reproduced in
monaural sound
Scanning preset stations in sequence
¢ The receiver will start scanning the stations in the
preset sequence and each station is received for 5
Tuning to preset stations
Press the desired preset number.
Example)
¢ For "3":
« When pressing the numeric buttons on the front
panel without selecting the TUNER, the tuner will be
selected automatically and the preset station will be
tuned in.
seconds.
At the desired station, press this button
again to stop scanning.
@ MEMORY BACKUP FUNCTION
The following items, set before the receiver is arned off,
are memorized.
¢ INPUT SELECTOR settings
° VCR 1 REC SELECTOR settings
¢ Surround mode settings
* Preset stations
¢ Video labels, etc.
Note:If the electricity fails or the AC input cord is
disconnected for about 2 weeks, they areal cleared.
So you should memorize them again.
Advertisement
Table of Contents
