Table of Contents
Advertisement
Entering video labels
This function can be operated only on video input
sources such as DVD, LDP, VCR 1 and AUX/TV.
Select the desired video input source to
enter its label.
INPUT SELECTOR'
INDEX
Press the VIDEO LABELS
button for more than 2
seconds.
Select the first character of the video label
@
while the digit is oe
INPUT SELECTOR/
INDEX
* Each time the INPUT SELECTOR/INDEX knob is
rotated, the characters changes as follows ;
26 Capital Letters:
AB CDEFGHIJKLMNOP
QRSTUVWXYZ
10 Arabic Numerals : 1234567890
9 Special Marks:
<>
*
+ ,-/
\
Memorize it within
6 seconds.
MEMO
/ ENTER
i
¢ If the
MEMOR Y/ENTER button is pressed for more
than 2 seconds on the character, a dot( - ) will appear
by the character.
¢ If the MEMORY/ENTER button is pressed without
selecting the desired character, the digit will be blank.
¢ If 6 seconds elapses, repeat again from the step 2.
Repeat steps 3 and 4 to memorize the rest
of up to 8 characters.
Note:All 9 charcters must be memorized.
Rectifying or clearing a video label
Select the desired video input source to be
rectified or cleared.
INPUT SELECTOR
iNDEX
or
OOOO
A=
vCR1
DVD
LDP
AUX/TV
Repeat the steps 2~5 in "Entering video
labels" procedure.
« To clear a video label, make a blank on each figit,
then the video label is cleared and its factory yideo
input source will be displayed.
Advertisement
Table of Contents
