Philips 32PW9788 Instruction Manual page 30

Side connections
1 2 3
Wired rear loudspeakers
13 V DC in 13V DC in V DC in
AUDIO in AUDIO in AUDIO in
(TV) (TV) (TV)
2.8V RMS 2. 2.8V RMS 8V RMS
4 4
1 1 4 4
2 2 3 3
1
3 3
Connect extra subwoofer
SUBW.
28
Camera or Camcorder
&
Connect your camera or camcorder as shown.
é
Connect to
equipment. For stereo equipment also connect
S-VHS quality with an S-VHS camcorder is obtained by
connecting the S-VHS cables with the S-video input
audio inputs 3.
Do not connect cable 1 and 2 at the same time. This may cause
picture distortion !
Headphone
Insert the plug into the headphone socket L as shown.
&
Press ¬ on the remote control to switch off the internal
é
loudspeakers of the TV.
The headphone impedance must be between 8 and 4000 Ohm. The
headphone socket has a 3.5 mm jack.
In the Sound menu select
headphone volume.
When no wireless RF surround sound is possible or when there
SURROUND
is too much interference you can still enjoy Dolby Pro Logic II
and Dolby Digital surround sound by connecting the wireless
receiver box to the TV with a stereo cinch to stereo 3.5 mm
jack cable.
&
Connect the (not supplied) cable to the
4 /15W 4 /15W 4 /15W
connector 4 at the wireless receiver box and the
R R L L
surround outputs at the back of the TV.
é Select
2 2
Speakers menu, p. 9.
To enhance the sound reproduction of your TV you can connect
an externally powered subwoofer (between 20 and 250 Hz).
& Connect the audio cable of the external subwoofer to the
SUBW.
é
Select
For details, please refer to the subwoofer's manual.
2 and
VIDEO
Headphone volume
in the Wireless surround menu item of the Setup,
Off
socket at the back of your TV.
in the Setup, Speakers menu, Subwoofer, p. 9.
External
3 for mono
AUDIO L
AUDIO R
to adjust the
AUDIO IN (TV)
3.
1
and
and
R L