Sony TRINITRON KV-SW21M80 Service Manual page 77

P
Changing the "Setup" setting
The "Setup" menu allows you to change the menu language, adjust the picture
position, label the connected equipment, select the color system, set the wake
up timer beep and reset your TV to factory settings.
1
Press WEGA GATE and select "Settings".
2
Press V or v to select the "Setup" icon (
3
Press V or v to select the desired item (e.g., "Language"), then press
Select
"Language"
"Picture Rotation"
(KV-SW21M85/
SW21M81 only)
"Video Label"
"Color System"
"Wake Up Timer
Beep"
"Factory Settings"
Notes
• To ensure the beeping sound can be heard, you must set an appropriate volume level on your
TV and make sure the TV is not in mute condition.
• To stop the beeping sound, press any buttons on the remote control or top control panel.
• If no button is pressed for three minutes, the beeping sound will automatically go off.
To
change the menu language.
Press V or v to select either "English" or "
.
adjust the picture position when it is not aligned with the TV
screen.
Press B or b to adjust the picture position, then press
label the connected equipment.
(1) Select "Video Input" and press
input you want to label, then press
(2) Select "Label" and press
the label options: "Video 1/Video 2/DVD", "VCR",
"SAT", "Game" or "Edit"*.
* You may edit the video label to your favorite name. Press V or v
to select alphanumeric characters for the label, then press
select the color system.
Press V or v to select either "Auto", "PAL", "SECAM",
"NTSC3.58" or "NTSC4.43", then press
"Auto".
allow your TV to emit beeping sound when TV switches on
automatically using wake up timer.
Press V or v to select "On", then press
To cancel, select "Off", then press
reset your TV to factory settings.
Press and press V or v to select "Yes", then press
To cancel, select "No", then press
), then press .
" (Arabic), then press
. Press V or v to select the
.
, then press V or v to select
. Normally, set this to
.
.
.
.
.
.
.