Sony TRINITRON KV-SW21M80 Service Manual page 74

N
Changing the "Sound" setting
The "Sound" menu allows you to adjust the sound settings.
1
Press WEGA GATE and select "Settings".
2
Press V or v to select the "Sound" icon (
3
Press V or v to select the desired item (e.g., "Sound Mode"), then press
Select
"Sound Mode"
"Balance"
"Intelligent Volume"
"Surround"
* You can adjust the setting to your personal preference in the "Sound Adjustment"
option only when the "Custom" mode is selected.
Adjusting the "Sound Adjustment" item under "Custom"
mode
The 5-Band Graphic Equalizer feature allows you to adjust sound frequency settings
of "Custom" mode in the menu.
1
Make sure that "Adjust" is selected, then press
Selecting "Reset" will set your TV to the factory setting.
2
Press B or b to select the desired sound frequency, then press V or v to
adjust the setting and press
The adjusted settings will be received when you select "Custom".
Notes
• Adjusting higher frequency will affect higher pitched sound and adjusting lower frequency
will affect lower pitched sound.
• You may display the settings directly using the SOUND MODE button on the top control
panel (see F) or
To
choose either "Dynamic" (low and high tones), "Standard"
(voice and high tones) or "Custom"*.
Press v or B to emphasize the left speaker.
Press V or b to emphasize the right speaker.
adjust the volume of all program numbers and video inputs
automatically.
Press V or v to select "On", then press
To cancel, select "Off", then press
choose either "On" (surround), "Simulated" (stereo-like
monaural sound) or "Off".
.
button on the remote control (see J).
), then press .
.
.
.
.