Sony TRINITRON KV-SW21M80 Service Manual page 66

Connecting optional components (continued)
Connecting to the component video input terminal (
TV rear panel
1
(MONO) L
R
Notes
• If your DVD player can output interlace and progressive mode signals, select the interlace
output when connecting to
either 525i/60Hz or 625i/50Hz interlace signals.
• The component video terminals on your DVD player are sometimes labeled Y/C
P Y/C /C or Y/B-Y/R-Y.
R, b r
• If you select "DVD" on your TV screen, the signal from the T (monitor output) jacks will not
be output properly. This does not indicate a malfunction.
Y
C
B
L (MONO)
C
R
R
(component video input) on your TV. Your TV can receive
Component video
cable
(not supplied)
Audio cable
(not supplied)
)
DVD player
/C Y/P /
B R, B