Preparation - Philips 32PW8907 Manual

2150.2 gb (16X24) RC2

Preparation

&
Place the TV on a solid surface.
! This TV weighs 56 kg !
For ventilation, leave at least 5 cm free all
around the TV.
Do not place the TV on a carpet.
To prevent any unsafe situations, do not place
any objects on top of the TV. Avoid heat,
direct sunlight and exposure to rain or water.
Keep mobile telephones at a safe distance to
avoid disturbances in picture and sound.
é
Insert the aerial plug firmly into the aerial
socket x at the back of the TV. For best
picture quality use the suppressor-aerial cable
supplied.
"
Remote control: Remove the cover of the
battery compartment.
Insert the 2 batteries supplied (Type R6-1,5V).
The batteries supplied do not contain the heavy
metals mercury and cadmium. Nevertheless in
many countries exhausted batteries may not be
disposed of with your household waste. Please
check on how to dispose of exhausted batteries
according to local regulations.
Note: this remote control functions with TVs and
other equipment which use the RC5 or RC6
signalling standard.
Preparation
2
26-06-2002 10:47 Pagina 2
m in .
1 m
RO6 / AA
'
Insert the mains plug of the TV in the
wall socket having a mains voltage of 220V-
240V.
To prevent damaging the mains (AC) cord
which could cause a fire or electric shock,
do not place the TV on the cord.
(
Switch the TV on : Press the power
switch A on the front of your TV.
A green indicator on the front of the TV
lights up and the screen comes on.
If the indicator is red (orange when
acquiring TV information, see p. 17),
NEX IEW
press the - P + keys on the remote control.
The green indicator blinks every time you press
a key on the remote control.
When you switch on your set for the first time,
the menu Language automatically appears on
the screen. The explanation appears in different
languages one at a time. Choose your own
language and press the
control.
Wireless transmitter module
Your TV has been prepared and equipped to
connect a wireless transmitter module with
an integrated cable and wireless surround
sound loudspeakers.
Select the correct type of transmitter in the
Setup menu, Speakers,Wireless transmitter,
p. 9. Default 864 MHz (for the
32PW8907/12 and /05) or 433 MHz (for the
32PW8907/58) has been selected at the
factory.
How to connect and to operate, see the
appendix to this manual, p. 33.
key on the remote
OK