Source; Decoder; Demo - Philips 32PW8907 Manual

2150.2 gb (16X24) RC2

Source

Setup
This menu allows you to select the peripheral
you connected to one of the external inputs.
&
Select Source.
é
Press the cursor down to select one of the
external inputs.
"
Press the cursor right to enter the list of
types of peripherals attached to the selected
input.
'
Select the peripheral device with the cursor
up/down.

Decoder

Setup
If a decoder or a descrambler is connected,
see p. 27, you can define one or more
programme numbers as decoder programme
numbers.

Demo

TV
Demo Auto demo
Teletext
Install
Main menu
Picture
Speakers
TV
NEX
Active control
Dealer demo - Digital options
The Demo menu allows to demonstrate the
TV features separately or in a continuous
loop.
26-06-2002 10:47
Source
EXT1
EXT2
EXT3
SIDE
(Centre input)
Decoder
Programme
Status
IEW
- Light sensor
- Comb filter
Pagina 11
Once you have selected the source, e.g.VCR,
this source will automatically be selected when
your remote control is in VCR mode, see p. 31,
and when you press the v key on the remote
control.
Centre input
When you have connected a Cinema Link audio
receiver to the TV (See separate Cinema Link
instruction manual) and you have selected one
of the external inputs as centre input, the
loudspeakers of the TV will act as centre
speaker, making a separate centre speaker
unnecessary.
&
Select Decoder with the cursor right.
é
Select Programme with the cursor down.
"
Select the programme number under which
you have stored the programme coming
from your decoder.
'
Select Status.
• Select the input used to connect your
decoder: None,
• Select None if you do not want the
selected programme number being
activated as a decoder programme
number.
&
Select Demo in the Main menu with the
cursor down.
é
Select Auto demo or one of the features
with the cursor right and press the OK key
on the remote control.
If Auto demo has been selected the demo
will automatically present all the features
sequentially in a loop. Press one of the cursor
keys to stop the Auto demo.
If one of the features has been selected, this
particular feature demo will run only once,
and the Demo menu will disappear.
Select Digital options, Light sensor and
Comb filter On or Off
Select one of the Digital options, Light sensor
and Comb filter On or Off to really see the
difference in picture quality.
In Dealer demo mode it is possible to change
channels with - P + and to adjust the volume.
Note: The Dealer demo is not part of the
automatic sequence and can only be activated
separately.
or .
EXT1 EXT2
Installation
11