Kenwood KDC-519 Instruction Manual page 8

It
General features
Increasing Volume
Press the [/_-] button.
Decreasing Volume
Press the [v] button.
Turning the volume down quickly.
Press the [ATT] button.
Each time the button is pressed the Attenuator turns ON or OFE
When it's ON, the "ATT" indicator blinks.
Press the [Q] button.
Each time the button is pressed the sound setting switches.
Sound settin_l Display
Flat "Flat"
Rock "Rock"
Top 40 "Top 40"
Pops "Pops"
Jazz "Jazz"
Easy "Easy"
Scan of Flat -- Easy "Scan"
User memory "User"
_ • User memory: The values set on tile <Audio control> (page 8).
• Each setting value is changed with the <Speaker setting> (page
9).
First, select the speaker type with the Speaker setting.
Compensating for low and high tones during low volume.
Press the [LOUD] button for at least 1 second.
Each time the button is pressed for at least 1 second the
Loudness turns ON or OFR
When it's ON, "LOUD ON" is displayed.
You can recall the best sound setting preset for different types of
the music.
1
Select the source to set
Press the [SRC] button.
2 Select the Sound type
m8m
1
2
3
4
Select the source for adjustment
Press the [SRC] button.
Enter Audio Control mode
Press the [AUD] button for at least 1 second.
Select the Audio item for adjustment
Press the [FM] or [AM] button.
Each time the button is pressed the items that can be adjusted
switch as shown below.
Adjust the Audio item
Press the [!<<] or [1_1_1] b utton.
Adiustment Item Display Rankle
Bass level "Bass" -8 -- +8
Middle level "Middle" -8 -- +8