Changing The "Picture" Setting - Sony TRINITRON KV-SA28M36 Service Manual

x Changing the "Picture" setting
The "Picture" menu allows you to adjust the picture settings.
1
Press MENU.
2
Make sure the "Picture" icon (
selected, then press
3
Press V or v to select the desired item (e.g., "Mode"), then press
Select
"Mode"
"Color Temperature"
"3D Intelligent Picture"
* You can adjust the setting to your personal preference in the "Picture Adjustment" and
"Color Temperature" options only when the "Personal" mode is selected (see page 24).
Note
• For NTSC 3.58 color system, "3D Comb Filter : On" or "3D–NR : On" display will appear
when "3D Intelligent Picture" changes from one mode to the other . For PAL color system,
Digital Comb Filter and 3D-NR are also available.
) is
.
To
choose either "Dynamic", "Standard", "Soft" or "Personal"*
(see page 12).
adjust white color tint.
Choose either "Cool" (blue tint), "Neutral" (neutral tint) or
"Warm" (red tint).
optimize picture quality.
Automatically, the picture will become clearer and sharper if the
signal is good and noise will be reduced if the signal is noisy.
Press V or v to select "On", then press
To cancel, select "Off", then press
Picture
Mode: Dynamic
Picture Adjustment
Color Temperature: Cool
3D Intelligent Picture: On
Select Confirm
.
.
.
continue
Menu Adjustment
End
23