Changing The "Picture" Setting - Sony Trinitron WEGA KV-DA322 Operating Instructions Manual

x Changing the "Picture" setting
The "Picture" menu allows you to adjust the picture settings.
1
Press WEGA GATE and select "Settings".
2
Make sure the "Picture" icon (
selected, then press
3
Press V or v to select the desired item (e.g., "DRC-MF"), then press
Select
"DRC-MF"
"Picture Mode"
"3D Intelligent Picture"
* You can adjust the setting to your personal preference in the "Picture Adjustment"
option only when the "Custom" mode is selected (see page 24).
Notes
• The DRC-MF mode is not selectable when using the Program Index feature or when the
"Game Mode" or "Twin" mode is turned "On". The mode is not available for HD (high-
definition) and progressive input signals.
• "3D Intelligent Picture" is not available in HD and progressive input signal.
• For NTSC 3.58 color system, "3D Comb Filter : On" or "3D–NR : On" display will appear
when "3D Intelligent Picture" changes from one mode to the other. For PAL color system,
Digital Comb Filter and 3D-NR are also available.
The DRC-MF logo (
Corporation.
) is
.
To
choose either "DRC1250" (for high density pictures), "DRC100"
(reduce flicker on the screen) or "Progressive" (reduce jitter of
any small areas or scanning lines on the screen).
choose either "Vivid", "Standard" or "Custom"* (see page 11).
optimize picture quality.
Automatically, the picture will become clearer and sharper if the
signal is good and noise will be reduced if the signal is noisy.
Press V or v to select "On", then press
To cancel, select "Off", then press
) and "DRC-MF" are trademarks of Sony
Picture
DRC-MF: DRC1250
Picture Mode: Vivid
Picture Adjustment
3D Intelligent Picture:
Select
Confirm
End
.
.
.
continue
Menu Adjustment
On
23