Network Cable Extensions - Raymarine ALPHA Installation Instructions Manual

Important:
When daisy-chaining instruments together, ensure that a suitably-rated
fuse is installed before applying power. The fuse rating must be
appropriate for the total power consumption of all daisy-chained
instruments in your system. For more information, refer to:
p.42 — Inline fuse and thermal breaker ratings
1. Alpha 9 performance display — receiving power directly from a 12 V or
24 V power source via a separately available power and RayNet cable.
2. Alpha 9 performance display — receiving power from the previous
instrument in series via a separately available daisy-chain cable.
3. Alpha 7 performance display — receiving power from the previous
instrument in series via a separately available daisy-chain cable.
4. 8-pin right-angled daisy chain cable, available separately.
5. 8-pin right-angled power to RayNet and bare end power wires cable,
available separately.
6. Protective cap — must be fitted when connector is not in use.
Note:
For information on the available cables and accessories, refer to the
following section: p.63 — Spares and accessories

Network cable extensions

If you wish to extend the length of a network cable connected to your
product, you can refer to the following section for further information:
p.63 — Spares and accessories
Network connections 39