Maytag Precision Touch 750 Series Use & Care Manual page 21

Leve ing Legs
Be suEethe ant!-tip bracket secures one of the rear
from accidentally tipping.
Remova of Gas Appmiance
Gas appHianceconnectors used to connect this appHiance to
the gas suppHyare [lot designed for conthuous movement,
Once hstaHed, DO NOT repeatedHymove this gas apphance
for deanhlg or to rdocate, If this appHiance has to be moved
and/or removed for servichlg, follow the procedure described
in the installation instructions, For information, contact
May'tag Customer Assistance at 1-800-688-9900 USA or
1-800-688-2002 Canada.
To prevent range from accidentally tipping, range must be
secured to the floor by sliding rear leveling leg into the anti-
tip bracket.
E ectrica Connection
Appliances which reqaire electrical
power are equipped with a three-
prong grounding plug which must be
plugged directly into a properly grounded
three-hole 120 volt electrical outlet.
Always disconnect power to appliance before servicing.
The three-prong grounding plug offers protection against
shock hazards, DO NOT CUT OR REMOVE THE THmRD
GROUNDmNG PRONG FROM THE POWER CORD PLUG.
If an ungrounded, two-hole or other type electrical outlet is
encountered, it is the personal responsibility of the
appliance owner to have the outlet replaced with a
properly grounded three-hole electrical outlet.
2O