Aiwa AV-D35 Operating Instructions Manual page 13

TO PLAY A DVD RECORDED IN DOLBY
DIGITAL SURROUND
player that contains a Dolby Digital decoder is connected to the
receiver, you can enjoy theater-quality audio right in your home
when playing discs recorded in Dolby Digital Surround.
1 Turn the FUNCTION selector to select the VIDEO
1/DVD/MD function.
2 Press the VIDEO 1/5.1 CH/BAND button.
- HHH911811uSK cmmi , . .
5:: Id-1 .
"5.1 ch IN" appears on the display and the DVD player
connected to the 5.1 INPUT terminals is selected as a source.
3 Start playing the DVD recorded in Dolby Digital
Surround.
RECORDING AN AUDIO SOURCE
1 Select the program source to be recorded.
Turn the FUNCTION selector.
2 Set the tape deck or MD recorder to the recording
mode.
3 Start the selected program source.
connect the AUDIO OUT (DOWN MIXING) terminals of the DVD
player to the VIDEO 1/DVD/MD AUDIO IN terminals of the unit.
• When recording sources by the MD recorder connected to the
VIDEO 1/DVD/MD AUDIO OUT terminals, first press the
ENTER button to display VIDEO 1, and turn the MULTI JOG to
select VIDEO 2 or VIDEO 3. Then select the source (V2 or V3
Recording car
MONITOR IN
>t be done while the VI indication is display*
rminals cannot be recorded.
ENGLISH 1 2