Table of Contents
Advertisement
| PLAYBACK
SINGLE PLAYBACK
(Either Deck | or Deck il)
3
5
(5)
Load a prerecorded tape in Deck | or II.
Set the DOLBY
NR switch.
@ Always set the switch to the same position that was used for
recording.
Set the REV MODE switch (see page 7).
Set the stereo amplifier for tape playback.
NR
ae
To stop playback
Press the stop (IM) button.
BLANK SKIP
This function allows you to skip unrecorded portions of the tape during
playback.
Set the TIMER switch to the PLAY -RELAY/SKIP position
©
When this mode is selacted, tf the deck encounters an unrecorded
porton of tape more than 15 seconds in length, it will fast forward
the tape until it encounters
another recorded portion, and resume
playback from that point,
8
<RABTIBT >
fri
When relay playback mode is selected, continuous playback can be per-
formed. When the tape in one deck reaches the end and stops, the other
deck will automatically begin playback.
1.
Load prerecorded tapes in Deck | and Deck Il.
® Make sure that both tapes have been recorded using the same
Dolby NR setting
2.
Set the DOLBY NR switch.
@ Aiways
set the switch
to the same
position that was
used for
recording.
3.
Set the REV MODE switch (see page 9).
Set the stereo amplifier for tape playback.
5.
Set the TIMER switch to the PLAY-RELAY/SKIP
position.
6.
Press the playback (P or 4) button of the deck
that will start to play first.
@ When the tape in one deck ends, the other deck automatically
begins playback.
© To cancel relay playback, set the TIMER switch to the OFF posi-
tion.
>
NOTES:
@
Relay playback can begin from either Deck | ar Deck It,
®@
The tape in the idle deck can be replaced during relay playback mode,
allowing many tapes to be played back continuously. This is a conve-
vient feature for parties, background music, etc.
@
When this mode is selected, if the deck encounters an unrecorded
portion of tape more than 15 secands in length, it will fast forward
the tape until it encounters another recorded portion, and resume play-
back from that point.
To stop playback temporarily (Deck it only)
Press the pause ( #) button.
©
To resume playback, either press the pause { 88) button again, or
press the playback (Pm or <4) button.
To stop playback
Press the stop (#@) button of the deck which is
currently playing.
Advertisement
Table of Contents
