ZyXEL Communications VMG Series User Manual page 361

The following table describes the fields in this screen.
Table 120 Security > Parental Control > Add or Edit PCP > Add New Service
LABEL DESCRIPTION
Add New Select the name of the service from the drop-down list. Otherwise, select User Define and specify
Service the name, protocol, and port of the service.
If you have chosen a pre-defined service in the Service Name field, this field will not be
configurable.
Protocol Select the transport layer protocol used for the service. Choices are TCP, UDP, or TCP & UDP.
Port Enter the port of the service.
If you have chosen a pre-defined service in the Service Name field, this field will not be
configurable.
Cancel Click Cancel to exit this screen without saving any changes.
OK Click OK to save your changes.
Add Site/URL Keyword
Click Add in the Site/URL Keyword section of the Edit or Add new PCP screen to open the following
screen.
Note: Do not include "HTTP" or "HTTPS" in the keyword. HTTPS connections cannot be blocked
by Parental Control.
Figure 208 Security > Parental Control > Add or Edit PCP > Add Keyword
The following table describes the fields in this screen.
Table 121 Security > Parental Control > Add or Edit PCP > Add Keyword
LABEL DESCRIPTION
Site/URL Enter a keyword and click OK to have the Zyxel Device block access to the website URLs that
Keyword contain the keyword.
Cancel Click Cancel to exit this screen without saving any changes.
OK Click OK to save your changes.
VMG/EMG/AM/DM/GM Series User's Guide
Chapter 23 Parental Control
361