Frequency Control; Open/Close Button - Kenwood KAC-X401M Instruction Manual

B.M_S.(Bass Management System)
s
mepeete
a ee ee
ee ane ee ee Ie
oe ee pepe iGleatoy
a
Mi If the unit is not going to be operated from the outside:
@) B.M.S. switch
This boosts the bass, focusing mainly on : ys
ae If the slide panel meets an obstacle while
the frequency setting determined using the liding, the slide operation will be halted. If
Toe . this happens, remove the obstacle and then
¢ (REMOTE) OPEN/CLOSE or
neepyeats press the OPEN/CLOSE button again.
(REMOTE) B.M.S. position: e |f the center unit power is switched OFF, or
When the switch is in this position, the
| the vehicle engine is switched OFF, while
bass is not boosted. the slide panel is open, the slide panel will
FRO
chen then close automatically, The next time the
| Operations using the
eee pelle) OPEN/CLOSE button
power is turned ON or the vehicle engine is
turned ON, the slide panel will return to its
original open state.
- B.M.S. (+6) position: = ¢ lf the B.M.S. switch setting is changed to
When the switch is in this position, the (REMOTE), the slide panel will close in
bass is boosted by 6dB. preparation for remote operation, even if the
The B.M.S. indicator glows. EXT.AMP.CONT. terminal is not connected.
Bassboost__[ +608 (ON) |
Bris Operations using the Take care not to allow your finger or any other
_ [Slide panel OPEN/CLOSE button 7 :
object to be trapped by the slide panel while it
.
i s
sliding.
@ B.M.S. FREQUENCY control oe
When the B.M.S. switch is set to the
B.M.S. (+6) position, this control can be
used to adjust the central frequency that
you want to emphasise. |
@ OPEN/CLOSE button
Each time you press this button, the slide
panel either opens or closes.
6 English