Control Terminal - Kenwood KAC-X401M Instruction Manual

@ Speaker Selection
¢ The rated input power of the speakers that are going to be connected should be greater haa
the maximum output power (in Watts) of the amplifier. Use of speakers having input power
ratings that are less than the output power of the amplifier will cause smoke to be emitted as
well as damage.
e Use speakers that have an impedance of 2Q or greater. When more than one set of speakers
are going to be used, calculate the combined impedance of the speakers and then connect
suitable speakers to the amplifier.
e : ~wWe.
Rated input power "and Maximum output of feeee
impedance of the speakers the amplifier P Canned
— Control terminal |
Attach the connection terminal to a commercially available wiring wier for in-car use, and
connect it to the unit.
An EXT.AMP.CONT. terminal can only be attached if Kenwood center unit is a model released in
1999 or latter, and has an "EXT.AMP.CONT." wire. Using the external amp control, up to 3
power amplifiers can be operated simultaneously (although this may not be possible, depending ~
on the type of wiring wier used, and its length).
Power control lead jeanind External amplifier control terminal
2 QHANHNAG (C2: ae ;
FQ {|| (Veo e a)
Power control wire
{(Blue/ White) |
CENTER UNIT
(Cassette receiver,
CD receiver, etc.)
External amplifier control , |
wire (Pink / Black) * : Commercially available parts _
English 9