Komatsu GD555-5 Operation & Maintenance Manual page 84

OPERATION
INPUT METHOD FOR TELEPHONE NUMBER
When an error for action code "E03" occurs, it is possible to display the telephone number.
1. Press the ( ) of the machine monitor mode selector switch 1 and display "OPERATION INFO".
2. Press the (>) or (<) portion of the machine monitor mode
selector switch 2 to display "TEL".
3. Press ( ) of machine monitor mode selector switch 1. It will
change to the display in the diagram on the right.
Once the telephone number is input, the input number will be
displayed next time.
4. A maximum of 12 digits can be displayed for the telephone
number. Input in order from the first digit. The cursor is
displayed at the input position. Press the (>) or (<) of machine
monitor mode selector switch 2 and select the number to input
from "0 to 9". For spaces, input "
After inputting the desired number, press the ( ) of machine
monitor mode selector switch 1. The cursor moves to the
position for the next number.
5. Repeat the procedure in Step 4 until the last digit. At the last digit, press ( ) of machine monitor mode selector
switch 1 to return to the previous screen.
If there is a mistake in the input or the input is to be stopped, press ( ) of machine monitor mode selector switch
1 to return to the previous screen.
6. When completing the operation, press ( ) of machine monitor mode selector switch 1 twice or turn the starting
switch OFF.
*
".
EXPLANATION OF COMPONENTS
3 - 31