Komatsu GD555-5 Operation & Maintenance Manual page 107

EXPLANATION OF COMPONENTS
BLADE SIDE SHIFT CONTROL LEVER
This lever (3) shifts the blade to the side.
(A) LEFT SHIFT: The blade is shifted to the left position.
(B) HOLD: The blade stops and is held in the same position.
(C) RIGHT SHIFT: The blade is shifted to the right.
POWER TILT CONTROL LEVER
This lever (4) changes the cutting angle of the blade.
(A) Max. cutting angle: This makes the blade cutting angle bigger.
This is effective when operating on hard
ground.
(B) HOLD: The blade stops and is held in the same position.
(C) Min. cutting angle: This makes the blade cutting angle smaller.
This is effective when operating on soft
ground.
3 - 54
OPERATION