Philips 29PT9416/58R Instruction Manual page 13

2030.3 gb 22-05-2001 10:29 Pagina 13
Available menu items in case of the selected
and available Surround modes.
Surround settings
Test start
Test stop
Centre volume
Balance
3D effect
Surround mode
Surround settings
Test start
Test stop
Centre volume
Balance
3D effect
Surround mode
*
'Dolby' 'Pro Logic' and the double-D symbol
trademarks of Dolby Laboratories Licensing Corporation.
Manufactured under license from Dolby Laboratories
Licensing Corporation.
Surround settings menu
Select
With no extra loudspeakers connected
• •
Do not change the predefined factory settings of Extra front or rear speakers in the
• •
Setup menu, p. 7.
• •
• • •
•
Note: you can select only those surround modes which can be used with the
broadcasted signal.
• • •
The graphical representation of the TV speakers is displayed and updated
according to the selected surround mode. Speakers which are active are
highlighted.
3D surround mode, which enables you to experience the effect of Dolby
Surround Pro Logic, is represented by the symbol ®r.The menu item
3D effect appears in which the level of the 3D effect can be selected.
Adjustment of the volume level of the loudspeakers
The menu item
mode, enables you to have a reference of the loudness of the internal
loudspeakers.
Select
Select
A steady noise tone is switched sequentially through the loudspeakers.The
loudspeakers activated light up in the screen graphic.
Select
Select
adjustment of the speaker levels.
Surround mode
Select the Surround Sound mode according to the sound mode being
broadcast.
3D Surround
3D Surround
3D Surround enables you to experience the effect of Dolby Surround Pro
Logic without the need of having rear speakers connected.
The graphical representation of the rear loudspeakers is replaced by the
symbol ®r.
Dolby 3 Stereo
Select the level of
Dolby 3 Stereo
The sound signal is now distributed over the front left, the front right and the
centre loudspeaker.
Stereo
Stereo
This mode reproduces only the left and right front sound signals.
You only hear a stereo sound if the broadcast which you are receiving is
transmitted in stereo or digital sound.
are
Press the
Go on with page 16.
in the Sound menu.
Surround settings
which only appears in Dolby 3 Stereo and 3D Surround
Test
or
Dolby 3 Stereo 3D Surround
and press the OK key.
Test start
or and alter the selected adjustment.
Centre volume Balance
and press the OK key when you have finished the
Test stop
(optimal with Dolby Surround broadcasting)
with the cursor left/right.
3D effect
(optimal with Dolby Surround broadcasting)
key to return to the
SOUND
.
menu.
Use of the menus
13