Building-In Features - Zanussi DI 720 Instructions For The Use And Care

Building-in Features
This dishwasher is designed to be fitted
under a kitchen counter or sink,
alternatively to be completed with a
specially made work-top.
In either case, it is essential that the
recess dimensions indicated in Fig. 17 are
followed. The recess ceiling may be
anywhere between 820 and 870 mm from
the floor inasmuch as the dishwasher
incoporates levelling feet adjustable over
a wide range.
To adjust the machine to the maximum
height, unscrew and remove the feet.
Then screw on the enclosed screw nuts
«A» and refit the feet (fig. 18).
Adjust the height and tighten the screw
nuts.
No special openings or systems are
required to permit ventilation of the
machine, but only to let the eletric supply
cable and the water fill and drain hoses
through.
When building the machine into a kitchen
unit, make sure that these water fill and
drain hoses are not bent or kinked.
The back of the machine may rest directly
against the rear wall of the recess.