Zanussi DI 720 Instructions For The Use And Care page 23

Cleaning the Spray Arm Nozzles
The holes in the spray arm nozzles must
be kept free of scraps for the efficiency of
the washing action. Inspect the spray
arms regularly. When thorough cleaning is
necessary remove the bottom spray arm
by releasing it from its securing catches
and pulling it out (see fig. 16).
Wash the spray arm in hot sudsy water,
using a stiff saucepan brush if necessary
to remove scraps. Reassemble carefully,
making sure the catches are secure.
To clean the top spray arm and nozzles,
slide out the top basket, then take off the
top of the nozzle (A) by releasing the side
catches, then unscrew the ring nut (B)
(see fig. 16). Remove and wash the parts
as above.
Reassemble the parts carefully.
Cleaning the Cabinet
Wipe the outside of the cabinet and
control panel regularly with a soft damp
cloth. When necessary use a liquid kitchen
or household cleaner to remove bad
marks, rinse with a damp cloth and rub up
with a soft duster. Never use abrasive
cleaners which could damage the surface.
If the machine is not going to be used
for some time take the following
precautions:
Unplug the machine and turn off the
water supply.
Fill up the rinse aid container.
Make sure that the tub is clean by
carrying out the Rinse and Hold
programme and then dry the inside
thoroughly.
Leave the door ajar.