Advertisement
PICTURE TROUBLES, THEIR CAUSE AND CURE
WHITE, FAINT IMAGE OR
NONE
Film was greatly
overexposed or
light-
struck. If it happens with 3000 speed
black and white
film, you probably
had
the
Film Speed Dial
set to
75.
Reset it
to 3000. Both color
and
black
and white
films will be light-struck if you pull out
the safety cover before
putting the film
pack
in the camera or if you
remove
a
film pack from the camera after
pulling
the
safety cover.
BLACK, FAINT IMAGE OR NONE
If no details
at
all are visible, the
shutterdidn'topen. Perhaps you didn't
reset No. 3 button. Or, the front of
the camera
wasn't pulled out
all the
way and locked. Or,
the camera
bat¬
tery is dead. Or, the shutter has been
damaged.
If a color print shows a few
faint
de¬
tails,
the Film Speed Dial probably was
set to 3000. Reset it to 75.
MANY WHITE SPECKS
They are a sign that you pulled
th(
yellow tab too swiftly; slow down a
bit
40
22C
Advertisement
