Sony DSR-60 Installation Manual page 13

INPUT
REF. VIDEO
: BNCx2 (loop-through)
1.0 Vp-p, 75 Q, sync negative : for composite video signal (black burst signal possible)
OUTPUT
REF. VIDEO
: BNCxl
NTSC
0.286 Vp-p, 75 Q, sync negative (composite sync + burst signal)
PAL 0.3 Vp-p, 75 Q, sync negative (composite sync)
VIDEO OUT : BNCx2
1/2 (SUPER)
1.0 Vp-p, 75 Q, sync negative
COMPONENT/RGB OUT VIDEO:
BNCx3
Luminance : 1.0 Vp-p, 75 2, sync negative
R-Y/B-Y_: 0.7 Vp-p, 75 Q (NTSC : 75 % PAL: 100 %)
§ VIDEO OUT : DIN 4P
Y : 1.0 Vp-p, 75 Q, sync negative
C: NTSC 0.286 Vp-p (burst level), 75 Q
PAL 0.3 Vp-p (burst level), 75 Q
SDI*
: BNCx2
Serial digital interface format (270 Mbps),
SMPTE 259M/ITU-R BT.656
*Using optional DSBK-100/100P (SDI output board)
QSDI* OUT
: BNCx1
Serial digital interface (DVCAM compression signal : Video + Audio + TC signal)
*Using optional DSBK-110/110P (QSDI output board)
AUDIO OUT
: XLR 3Px4, MALE
+4 dBu, 600 Q load, balanced (low impedance)
MONITOR AUDIO
: PHONO JACKx1
—6 dBu, 47 kQ load, unbalanced
HEADPHONES
: Stereo phone jackx1
—16 dBu (front VR max.), 8 Q load, unbalanced 96.3
TIME CODE*
: BNCxl1
2.2 Vp-p+3.0 dB, 75 Q, unbalanced
*Using optional DSBK-130/130P (time code input/output board)
|
|
F
|
|
|