Table of Contents
Advertisement
Available languages
Available languages
A Caution: Read this page carefully to ensure safe operation.
Before applying power
For the United Kingdom
Important!
Units shipped to the U.K. are designed for operation on
240 volts AC only.
The mains plug must be removed from the wall socket prior
to any internal examination.
The wires in this mains lead are coloured in accordance with
the following code:
Blue
22.2.2.
eee eee
eer eeeeseeese Neutral
BIOWN: cisceveniess eeebiseescsestoreeeexes LING
The wires in this mains lead must be connected to the termi-
nals in the plug as follows:
Wire colour
Plug terminal marking
BIUC
oe. eeceeeeeeeeeeeeeereeermeeeeeres
N or Black
BLOWN ......2.seseeseeeeeeee
.
Lor Red
(>
Brown to
Live
L
Blue to
Neutra!
wv)
Piug
Notes:
1. Ifa 13-amp plug is used, this must be fitted with a 13-amp
fuse.
2. \f a 3-pin plug with earthing contact is used, no wire must
be connected to the E terminal.
For Australia and Europe
Important!
Units shipped to Australia are designed for operation on 240 V
AC only.
Units shipped to Europe are designed for operation on 230 V
AC only.
HSITO
For other countries
Important!
Units shipped to countries other than the above countries are
equipped with an AC voltage selector switch on the rear panel.
Refer to the following paragraph for the proper setting of this
switch.
AC voltage selection
This unit operates on 110-120 or 220-240 volts AC. The AC
voltage selector switch on the rear panel is set to the voltage
that prevails in the area to which the unit is shipped. Before
connecting the power cord to your AC outlet, make sure that
the setting position of this switch matches your line voltage.
{f not, it must be set to your voltage in accordance with the
following direction.
Note: $$
Our warranty does not cover damage caused by excessive line
voltage due to improper setting of the AC voltage selector
switch.
AC voltage selector switch
—_—
qe
AC110-
120V ~ AC220V~
AC240V~
Move switch lever to match your line voltage with
a small screwdriver or other pointed tool.
Safety precautions
WARNING:
TO PREVENT FIRE OR
SHOCK HAZARD,
DO NOT
EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
SW-700 (En) 3
Advertisement
Table of Contents
