6d Thread cutter clamping mechanism (solenoid)
Is used to carry out thread cutter solenoid test
Check:
• Select test 6d.
• Press icon to activate the solenoid. The colour of the
icon will change to light blue, 'Running' appears, and
the solenoid clicks.
• Press icon again to stop the solenoid. 'Successful'
appears.
• To return to section 6, press
Repair note:
•
Check cables for deformation and/or
wear and tear.
•
Replace complete clutch carriage
4.3.11).
•
Replace PCBA-Base
BERNINA International AG
.
(see
(see
4.2.4).
Seestrasse 161
CH-8266 Steckborn
DRAFT – VERSION
Schweiz
Seite 148 von 172