Advertisement
INSTRUCTIONS FOR USE
SURROUND SOUND
Virtual Surround
Your receiver is able to reproduce one or more forms of virtual
4
{
i
;
}
|
{
!
SURROUND
PRO LOGIC, DOLBY DIGITAL, DTS, MPEG
In addition to GURROUNE, the surround mode used —
depending on the source material — will be displayed. In case
of digital surround, the sound format AC-3 (for Dolby Digital),
DTS or MPEG {for MPEG 2 Multichannel) will be displayed,
followed by the sound channels, available on the source (e. g.
DVD).
Example: AC ~3 3/e. | Dolby Digital, 3 front channels,
The level of virtual surround sound effect can be adjusted in
2 surround channels and @ subwoofer
the setup menu. The following surround sound modes are
channel. —
available:
8
MPEG 2/G.0 MPEG Multichannel, stereo sound only.
RC~3 3/ 1.2 Dolby Digital, 3 front channels,
30 SURROUND
' (mono) surround channel without
No rear speakers are needed. The sound of the rear channel
ere
Subwoofer signal.
is simulated by the front speakers. Surround sound is
ENS 3/e.+
DTS, 3 front channels, 2 surround
simulated through the front left, right and center speakers.
|
channels and a subwoofer channel.
Bae
neu
arene
MULTI FRONT
o |
PRONT-3
STER EG
;
Phantom speakers are created next to the left and right front
4
The surround sound is muted. 3 Stereo lets you listen to
speaker.
NIGHT MODE (only on the remote control)
The loud parts of the sound are lowered and the soft
passages are raised. You can enjoy surround sound without
disturbing sleeping children or neighbours. Night mode only
works with Dolby Digital and MPEG, and only if supported by
the source material.
Advertisement
