Adjusting The Shock Absorber; Assembly - Yamaha XSR900P Owner's Manual

Instrument and control functions
1
2
(a)
3
4
5
1. Compression damping force adjusting bolt
(for fast compression damping)
6
Compression damping setting:
Minimum (soft):
7
11 click(s) in direction (b)
Standard:
8
6 click(s) in direction (b)
Maximum (hard):
1 click(s) in direction (b)
9
TIP
10

When turning the damping force
adjuster in direction (a), the 0 click
11
position and the 1 click position
may be the same.
12

When turning the damping force
adjuster in direction (b), it may click
13
beyond the stated specifications,
however such adjustments are in-
effective and may damage the
suspension.
1 1 1
(b)

Adjusting the shock absorber

assembly

This shock absorber assembly is
equipped with a spring preload adjust-
ing ring and a rebound damping force
adjusting screw.
NOTICE
To avoid damaging the mechanism,
do not attempt to turn beyond the
maximum or minimum settings.
Spring preload
5-27
1. Remove the side covers. (See
page 8-9.)
2. Turn the adjusting ring in direction
(a) to increase the spring preload.
Turn the adjusting ring in direction
(b) to decrease the spring preload.
Align the appropriate notch in the
adjusting ring with the position in-
dicator on the shock absorber.
EAU94912
ECA10102