Disassembly Procedure - Mitsubishi Electric PLA-ZM35EA2 Service Manual

Split-type, heat pump air conditioners
Hide thumbs Also See for PLA-ZM35EA2:
Table of Contents

Advertisement

12

DISASSEMBLY PROCEDURE

: Indicates the visible parts in the photos/figures.
OPERATING PROCEDURE
1. Removing the filter
(1) Slide the knob of air intake grille toward the arrow to
open the air intake grille. (See Figure 1)
(2) Pull down the lever of the air intake grille to remove the
filter. (See Figure 2)
2. Removing the air intake grille
(1) Slide the knob of air intake grille toward the arrow to
open the air intake grille. (See Figure 1)
(2) Remove the hook of drop prevention strap from the
panel.
(3) Remove the air intake grille.
3. Removing the electrical box cover
(1) Remove the air intake grille and the filter.
(Refer to procedure 2)
(2) Loosen the 2 electrical box cover fixing screws (M4×10)
approximately 2 to 3 mm. (See Photo 1)
(3) Slide the electrical box cover toward the arrow to remove.
(See Photo 2)
OCH777A
Figure 1
Air intake grille
Figure 2
Hook of drop
prevention strap
Photo 1
Photo 2
37
Be careful when removing heavy parts.
PHOTOS/FIGURES
Knob
Electrical box cover
fixing screws
Electrical box cover
Slide
Grille
Filter
Intake grille

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents