Table of Contents
Advertisement
Before applying power
For the U.S.A. and Canada
important!
Units shipped
to the U.S.A.
and Canada
are designed
for
operation on 120 valts AC only.
CAUTION:
TO PREVENT ELECTRIC SHOCK DO NOT USE
THE AC PLUG WITH AN EXTENSION CORD, RECEPTACLE OR
OTHER
OUTLET
UNLESS
THE
BLADES
CAN
BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
For the United Kingdom
Important!
Units shipped to the U.K. are designed for operation on 240
volts AC only.
The mains plug must be removed from the wall socket prior to
any Internal examination.
The wires in this mains lead are coloured in accordance with the
following code:
Neutral
Live
The wires in this mains lead must be connected to the terminals
in the plug as follows:
Wire colour
Plug terminal marking
N or Black
ictneeeteeens
LOOr Red
S$
Brawn to
Live
Blue to
Neutral
)
Plug
Notes:
1.If
a 13-amp
plug
is used,
this
must
be fitted
with
a
13-amp
fuse.
2. lf a 3-pin plug with earthing contact is used, no wire must be
connected to the E terminal.
Safety precautions
A Caution: Read this page carefully to ensure safe operation.
For Australia and Europe
Important!
Units shipped to Australia are designed for operation on 240 V AC
only.
Units shipped to Europe are designed for operation on 230V'AC bniy.
For other countries
Important!
Units shipped to countries other than the above countries are equipped
with an AC voltage selector switch on the rear panel.
Refer to the
following paragraph for the proper setting of this switch.
AC voltage selection
This unit operates on 110-120 or 220-240 volts AC. The AC voltage
selector switch Type A or Type B on the rear panel is set to the
voltage that prevails in the area to which the unitis shipped. Before
connecting the power cord to your AC outlet, make sure that the
setting position of this switch matches your line voltage.
If not, it
must be set to your voltage in accordance
with the following
direction.
AC voitage selector switch
ii
mall
AC110-
«+»
AC 220-
120 V ~
240 V ~
ijn
= eile
AC220V~
AC 230-240V~
Type A
AC 110-
120 V ~
Move switch lever to match your line voltage with
a small screwdriver or other pointed toatl,
Note:
———___—________-__
SSeS
Our warranty does not cover damage caused by excessive line
voltage due to improper setting of the AC voltage selector switch.
WARNING:
TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
BDO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER
{OR BACK). NO USER-SERVICEABLE
PARTS
INSIDE, REFER
SER-
VICING TO QUALIFIED SERVICE PERSONNEL.
THE LIGHTNING
FLASH WITH ARROWHEAD
SYMBOL, WITHIN AN EQUILATERAL TRIANGLE,
IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED
"DANGEROUS VOL-
TAGE" WITHIN THE PRODUCT'S
ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE.
TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
.
THE EXCLAMATION
POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE
USER TO THE PRESENCE
OF IMPORTANT OPERATING AND
MAINTENANCE
(SERVICING)
IN-
STRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
DP-R4450 Ent
3
Advertisement
Table of Contents
