Table of Contents
Advertisement
For your records
Record the serial number, found on the back of the
unit, in the spaces designated on the warranty card,
and in the space provided below. Refer to the model
and serial numbers whenever you call upon your dealer
for information or service on this product.
Model...
Serialnumber
After unpacking
After unpacking, we recommend that you inspect the
unit for any possible shipping damage. If your unit is
damaged
or fails to operate,
notify your dealer im-
mediately.
lf your unit was shipped to you directly,
notify the shipping company without delay. Only the
consignee (the person or company receiving the unit)
can file a claim against the carrier for shipping damage.
We recommend that you retain the original carton and
packing materials to prevent any damage should you
transport or ship your unit in the future.
Before applying power
Important!
USA, Canada, Australia, U.K and Europe
Unit shipped to the above are not equipped with an AC
voltage selector switch and the discussion of such a
switch that follows should be disregarded.
All other countries
Units shipped to countries other than the above are
equipped with an AC voltage selector switch on the rear
panel. Refer to the following paragraph for the proper
setting of this switch.
WARNING:
TO
PREVENT
FIRE
OR
ELECTRIC
SHOCK,
DO
NOT
EXPOSE
THIS
APPLIANCE TO RAIN OR MOISTURE.
AC voltage selection
This unit operates on 120 volts or 220-240 volts AC.
The AC voltage selector switch on the rear panel is set
to the voltage that prevails in the area to which the unit
is shipped. Before connecting the power cord to your
AC outlet, make sure that the setting position of this
switch matches your line voltage. If not, it must be set
to your voltage in accordance with the following direc-
tion.
Note:
Our warranty
does
not cover
damage
caused
by excessive
line
voltage due to improper setting of the AC voltage selector switch.
L
AC voltage selector switch
AC120V~
<>
AC220—240V~
ACI20V~
«»
AC220—240V~
Switch lever
ore
This
shows
switch
fever is locked in AC
120V~ position.
This
shows
switch
lever is locked in AC
220-240V~ position.
Move
switch
lever to match
your line
voltage with a small screwdriver or other
pointed tool.
For United Kingdom
The mains plug must be removed
from the wall
socket prior to any internal examination.
Important
The wires in this mains lead are coloured in accor-
dance with the following code:
Blue
. Neutral
. Live
The wires in this mains lead must be connected to
the terminals in the plug as follows:
Wire colour
Plug terminal marking
BIG: fescccasevas
Ae eyewad edocs tonnes N or Black
BROWN winstate.
Asee Rivet ena L or Red
OE:
Brown to
Live
Blue to —
Neutral
Plug
Notes:.
1) Ifa 13-amp plug is used, this must be fitted with a 5-amp
fuse.
2) If a 3-pin plug with earthing contact is used, no wire must
be connected to the E terminal.
Advertisement
Table of Contents
