Table of Contents
Advertisement
Operating instructions
Before starting the following procedures, set the VCR A and
VCR B switches as follows:
1. The input selectors of the VCR A and VCR B to VIDEO
2. The antenna selectors of the VCR A and VCR B to TV
3. lf your VCR is not equipped with an input selector, con-
nect the pin plugs to the correct jacks.
To watch a TV program
1. Set the ANTENNA selector to TV or turn the power of the
controller off.
2. Adjust the TV program selector to receive your favorite
program.
3. Adjust the TV volume control.
To watch a video picture on TV and listen to the sound
through the speakers
1. Set the TV program selector switch to a vacant channel,
3 or 4.
. Press the VCR A, VCR B or VDP/TV TUNER switch.
. Set the ANTENNA selector to VIDEO.
. Set the AUDIO INJECTION switch to OFF.
. Operate the VCR A, VCR B or VDP. For further operation
details, follow the VCR A, VCR B or VDP Instruction Man-
ual.
. Set the FADER contro! to BRIGHT.
. Adjust the volume control and tone controls of the ampli-
fier as your preference.
8. Adjust video controls (ENHANCER, NOISE FILTER, STA-
BILIZER, SHARPNESS and DETAIL) as your preference.
OaKRWN
SND
To watch the picture of video system while listening to
the audio sound
. Press the VCR A, VCR B or VDP/TV TUNER switch.
. Set the ANTENNA selector to VIDEO.
. Press the AUDIO INJECTION switch.
. To listen to tape sound, press the TAPE switch.
. Set the FADER control to BRIGHT.
. Start playback of VCR A, VCR B or VDP and audio pro-
gram source.
:
7. Adjust the volume control and tone controls of the ampli-
fier as your preference.
8. Adjust the video
control
(ENHANCER,
NOISE
FILTER,
STABILIZER, SHARPNESS
and DETAIL) as your prefer-
ence.
Oo
hWN—
@® Turn off or set to TV.
@ set to VIDEO.
@ Press.
@ Set to BRIGHT.
@® Press.
KVC-470 (u)
7
Advertisement
Table of Contents
